एक क्षेत्र के मध्य आधे प्रोग्रामेटिक रूप से ड्रा करें

Question

मैं एक गोले के मध्य आधे को बनाने की कोशिश कर रहा हूं। मूल रूप से एक क्षेत्र बनाने के लिए, स्टैक नंबर और स्लाइस नंबर दिए गए हैं, और प्रगति के phiलिए दो चर (स्लाइस के लिए) और theta(ढेर के लिए) जिम्मेदार हैं। और प्रक्रिया को नीचे की टोपी, शरीर और शीर्ष टोपी (जैसा कि नीचे देखा गया है) बनाने में विभाजित किया गया है। मध्य आधा ( thetaनीचे के रूप में मध्य 50%) प्राप्त करने के लिए , हमें कैप को छोड़ना होगा, और किसी तरह शरीर को संशोधित करना होगा। मैं स्टैक नंबरों ( 1/4*stackNumbers to 3/4*stackNumbers) के साथ खेल रहा था लेकिन मुझे जो परिणाम चाहिए वह नहीं दिया।

मध्य क्षेत्र को प्राप्त करने के लिए मुझे गोलाकार पीढ़ी को कैसे संशोधित करना चाहिए (pi/4 <theta <pi*3/4 ) ? मेरी समग्र समस्या यह है कि मैं गोला को 3 अलग-अलग भागों में कैसे विभाजित कर सकता हूँ ऊपरी 25%, मध्य 50% और नीचे 25%?

यहाँ एक प्रोग्राम प्रोग्राम बनाने के लिए लोकप्रिय कोड है:

private void generateSphere(int stackNumber, int sliceNumber, boolean facingOut) {
    int capVertexNumber = 3 * sliceNumber;
    int bodyVertexNumber = 4 * sliceNumber * (stackNumber - 2);
    int vertexNumber = (2 * capVertexNumber) + bodyVertexNumber;
    int triangleNumber = (2 * capVertexNumber) + (6 * sliceNumber * (stackNumber - 2));

    vertices = new float[3 * vertexNumber];
    normals = new float[3 * vertexNumber];
    texCoords = new float[2 * vertexNumber];
    indices = new char[triangleNumber];

    // bottom cap
    // createCap(stackNumber, sliceNumber, false, facingOut);

    // body
    createBody(stackNumber, sliceNumber, facingOut);

    // top cap
    createCap(stackNumber, sliceNumber, true, facingOut);
}

private void createCap(int stackNumber, int sliceNumber, boolean top, boolean facingOut) {

    float stackPercentage0;
    float stackPercentage1;

    if (!top) {
        stackPercentage0 = ((float) (stackNumber - 1) / stackNumber);
        stackPercentage1 = 1.0f;

    } else {
        stackPercentage0 = (1.0f / stackNumber);
        stackPercentage1 = 0.0f;
    }

    float t0 = stackPercentage0;
    float t1 = stackPercentage1;
    double theta0 = stackPercentage0 * Math.PI;
    double theta1 = stackPercentage1 * Math.PI;
    double cosTheta0 = Math.cos(theta0);
    double sinTheta0 = Math.sin(theta0);
    double cosTheta1 = Math.cos(theta1);
    double sinTheta1 = Math.sin(theta1);

    for (int slice = 0; slice < sliceNumber; slice++) {
        float slicePercentage0 = ((float) (slice) / sliceNumber);
        float slicePercentage1 = ((float) (slice + 1) / sliceNumber);
        double phi0 = slicePercentage0 * 2.0 * Math.PI;
        double phi1 = slicePercentage1 * 2.0 * Math.PI;
        float s0, s1;
        if (facingOut) {
            s0 = 1 - slicePercentage0;
            s1 = 1 - slicePercentage1;
        } else {
            s0 = slicePercentage0;
            s1 = slicePercentage1;
        }
        float s2 = (s0 + s1) / 2.0f;
        double cosPhi0 = Math.cos(phi0);
        double sinPhi0 = Math.sin(phi0);
        double cosPhi1 = Math.cos(phi1);
        double sinPhi1 = Math.sin(phi1);

        float x0 = (float) (sinTheta0 * cosPhi0);
        float y0 = (float) cosTheta0;
        float z0 = (float) (sinTheta0 * sinPhi0);

        float x1 = (float) (sinTheta0 * cosPhi1);
        float y1 = (float) cosTheta0;
        float z1 = (float) (sinTheta0 * sinPhi1);

        float x2 = (float) (sinTheta1 * cosPhi0);
        float y2 = (float) cosTheta1;
        float z2 = (float) (sinTheta1 * sinPhi0);

        vertices[vertexCount + 0] = x0;
        vertices[vertexCount + 1] = y0;
        vertices[vertexCount + 2] = z0;

        vertices[vertexCount + 3] = x1;
        vertices[vertexCount + 4] = y1;
        vertices[vertexCount + 5] = z1;

        vertices[vertexCount + 6] = x2;
        vertices[vertexCount + 7] = y2;
        vertices[vertexCount + 8] = z2;

        if (facingOut) {
            normals[vertexCount + 0] = x0;
            normals[vertexCount + 1] = y0;
            normals[vertexCount + 2] = z0;

            normals[vertexCount + 3] = x1;
            normals[vertexCount + 4] = y1;
            normals[vertexCount + 5] = z1;

            normals[vertexCount + 6] = x2;
            normals[vertexCount + 7] = y2;
            normals[vertexCount + 8] = z2;
        } else {
            normals[vertexCount + 0] = -x0;
            normals[vertexCount + 1] = -y0;
            normals[vertexCount + 2] = -z0;

            normals[vertexCount + 3] = -x1;
            normals[vertexCount + 4] = -y1;
            normals[vertexCount + 5] = -z1;

            normals[vertexCount + 6] = -x2;
            normals[vertexCount + 7] = -y2;
            normals[vertexCount + 8] = -z2;
        }

        texCoords[texCoordCount + 0] = s0;
        texCoords[texCoordCount + 1] = t0;
        texCoords[texCoordCount + 2] = s1;
        texCoords[texCoordCount + 3] = t0;
        texCoords[texCoordCount + 4] = s2;
        texCoords[texCoordCount + 5] = t1;

        if ((facingOut && top) || (!facingOut && !top)) {
            indices[indexCount + 0] = (char) (triangleCount + 1);
            indices[indexCount + 1] = (char) (triangleCount + 0);
            indices[indexCount + 2] = (char) (triangleCount + 2);
        } else {
            indices[indexCount + 0] = (char) (triangleCount + 0);
            indices[indexCount + 1] = (char) (triangleCount + 1);
            indices[indexCount + 2] = (char) (triangleCount + 2);
        }

        vertexCount += 9;
        texCoordCount += 6;
        indexCount += 3;
        triangleCount += 3;
    }

}

private void createBody(int stackNumber, int sliceNumber, boolean facingOut) {
    for (int stack = 1; stack < stackNumber - 1; stack++) {
        float stackPercentage0 = ((float) (stack) / stackNumber);
        float stackPercentage1 = ((float) (stack + 1) / stackNumber);

        float t0 = stackPercentage0;
        float t1 = stackPercentage1;

        double theta0 = stackPercentage0 * Math.PI;
        double theta1 = stackPercentage1 * Math.PI;
        double cosTheta0 = Math.cos(theta0);
        double sinTheta0 = Math.sin(theta0);
        double cosTheta1 = Math.cos(theta1);
        double sinTheta1 = Math.sin(theta1);

        for (int slice = 0; slice < sliceNumber; slice++) {
            float slicePercentage0 = ((float) (slice) / sliceNumber);
            float slicePercentage1 = ((float) (slice + 1) / sliceNumber);
            double phi0 = slicePercentage0 * 2.0 * Math.PI;
            double phi1 = slicePercentage1 * 2.0 * Math.PI;
            float s0, s1;
            if (facingOut) {
                s0 = 1.0f - slicePercentage0;
                s1 = 1.0f - slicePercentage1;
            } else {
                s0 = slicePercentage0;
                s1 = slicePercentage1;
            }
            double cosPhi0 = Math.cos(phi0);
            double sinPhi0 = Math.sin(phi0);
            double cosPhi1 = Math.cos(phi1);
            double sinPhi1 = Math.sin(phi1);

            float x0 = (float) (sinTheta0 * cosPhi0);
            float y0 = (float) cosTheta0;
            float z0 = (float) (sinTheta0 * sinPhi0);

            float x1 = (float) (sinTheta0 * cosPhi1);
            float y1 = (float) cosTheta0;
            float z1 = (float) (sinTheta0 * sinPhi1);

            float x2 = (float) (sinTheta1 * cosPhi0);
            float y2 = (float) cosTheta1;
            float z2 = (float) (sinTheta1 * sinPhi0);

            float x3 = (float) (sinTheta1 * cosPhi1);
            float y3 = (float) cosTheta1;
            float z3 = (float) (sinTheta1 * sinPhi1);

            vertices[vertexCount + 0] = x0;
            vertices[vertexCount + 1] = y0;
            vertices[vertexCount + 2] = z0;

            vertices[vertexCount + 3] = x1;
            vertices[vertexCount + 4] = y1;
            vertices[vertexCount + 5] = z1;

            vertices[vertexCount + 6] = x2;
            vertices[vertexCount + 7] = y2;
            vertices[vertexCount + 8] = z2;

            vertices[vertexCount + 9] = x3;
            vertices[vertexCount + 10] = y3;
            vertices[vertexCount + 11] = z3;

            if (facingOut) {
                normals[vertexCount + 0] = x0;
                normals[vertexCount + 1] = y0;
                normals[vertexCount + 2] = z0;

                normals[vertexCount + 3] = x1;
                normals[vertexCount + 4] = y1;
                normals[vertexCount + 5] = z1;

                normals[vertexCount + 6] = x2;
                normals[vertexCount + 7] = y2;
                normals[vertexCount + 8] = z2;

                normals[vertexCount + 9] = x3;
                normals[vertexCount + 10] = y3;
                normals[vertexCount + 11] = z3;
            } else {
                normals[vertexCount + 0] = -x0;
                normals[vertexCount + 1] = -y0;
                normals[vertexCount + 2] = -z0;

                normals[vertexCount + 3] = -x1;
                normals[vertexCount + 4] = -y1;
                normals[vertexCount + 5] = -z1;

                normals[vertexCount + 6] = -x2;
                normals[vertexCount + 7] = -y2;
                normals[vertexCount + 8] = -z2;

                normals[vertexCount + 9] = -x3;
                normals[vertexCount + 10] = -y3;
                normals[vertexCount + 11] = -z3;
            }

            texCoords[texCoordCount + 0] = s0;
            texCoords[texCoordCount + 1] = t0;
            texCoords[texCoordCount + 2] = s1;
            texCoords[texCoordCount + 3] = t0;
            texCoords[texCoordCount + 4] = s0;
            texCoords[texCoordCount + 5] = t1;
            texCoords[texCoordCount + 6] = s1;
            texCoords[texCoordCount + 7] = t1;

            // one quad looking from outside toward center
            //
            // @formatter:off
            //
            // s1 --> s0
            //
            // t0 1-----0
            // | | |
            // v | |
            // t1 3-----2
            //
            // @formatter:on
            //
            // Note that tex_coord t increase from top to bottom because the
            // texture image is loaded upside down.
            if (facingOut) {
                indices[indexCount + 0] = (char) (triangleCount + 0);
                indices[indexCount + 1] = (char) (triangleCount + 1);
                indices[indexCount + 2] = (char) (triangleCount + 2);

                indices[indexCount + 3] = (char) (triangleCount + 2);
                indices[indexCount + 4] = (char) (triangleCount + 1);
                indices[indexCount + 5] = (char) (triangleCount + 3);
            } else {
                indices[indexCount + 0] = (char) (triangleCount + 0);
                indices[indexCount + 1] = (char) (triangleCount + 2);
                indices[indexCount + 2] = (char) (triangleCount + 1);

                indices[indexCount + 3] = (char) (triangleCount + 2);
                indices[indexCount + 4] = (char) (triangleCount + 3);
                indices[indexCount + 5] = (char) (triangleCount + 1);
            }

            vertexCount += 12;
            texCoordCount += 8;
            indexCount += 6;
            triangleCount += 4;
        }
    }

} 

Answer 1

अपने प्रश्न के बारे में अपने रिंगों द्वारा गठित क्षेत्र के साथ निर्वासन के बारे में सोचें। यदि आपके पास 5 का टेस्यूलेशन कारक है, तो आपके पास एक शीर्ष कैप, 2 मध्य खंड और एक निचला कैप होगा। नीचे के दो टेसेलेशन रिंग 25% बॉटम कैप और टॉप टेसेलेशन दो रिंग 25% टॉप कैप हैं। केंद्र इसलिए 50% पर इसके दोनों ओर चेहरों के सेट के साथ भूमध्य रेखा पर एक अंगूठी है। यहाँ एक नमूना है कि प्रत्येक क्षेत्र में रिंगों की पहले गणना करके और फिर प्रत्येक रिंग के बीच चेहरों को उत्पन्न करके एक गोले को कैसे अलग किया जाए।

float radius = 1.0f;
const int tesselationFactor = 5;

for (int i = 0; i <= tesselationFactor; i++)
{
    const float PI = 3.14159265359f;
    const float PIDIV2 = PI / 2.0f;

    // find height of ring
    float height = (i*PI / tesselationFactor) - PIDIV2;
    float dy = sinf(height);
    float theta = cosf(height);

    // locate verticies equally around center to form a ring
    for (int j = 0; j <= tessellation * 2; j++)
    {

        float longitude = static_cast<float>(j) * PIDIV2 / (tessellation * 2);
        float dx = sinf(longitude) * theta;
        float dz = cosf(longitude) * theta;

        Vector normal{ dx, dy, dz }; // initialize vector
        vertices.push_back(VertexPositionNormal(normal * radius, normal));
    }
}
// Fill the index buffer with triangles joining each pair of latitude rings.
int stride = tessellation * 2 + 1;
for (int i = 0; i < tesselationFactor; i++) // verticle rings
{
    for (int j = 0; j <= tessellation * 2; j++) // horizontal verticies
    {
        // 
        int i1 = i + 1;
        int j1 = (j + 1) % stride;
        /* connecting face */
         // triangle 1
        index_push_back(indices, i * stride + j);
        index_push_back(indices, i1 * stride + j);
        index_push_back(indices, i * stride + j1);
         // triangle 2
        index_push_back(indices, i * stride + j1);
        index_push_back(indices, i1 * stride + j);
        index_push_back(indices, i1 * stride + j1);
    }
}