यदि आप LVM के साथ LVM में Ubuntu के होते हैं (Ubuntu Server डिफ़ॉल्ट रूप से LVM का उपयोग करता है)।
इस स्क्रिप्ट का अगले अनुप्रयोगों के साथ Ubuntu Oneiric 11.10 x86_64 3.0.0-16-सर्वर में परीक्षण किया गया था:
LVM version: 2.02.66(2) (2010-05-20)
Library version: 1.02.48 (2010-05-20)
Driver version: 4.20.0
grub-install (GRUB) 1.99-12ubuntu5
aufs - advanced multi layered unification filesystem. version 2.1-standalone.tree-3.0-rcN-20110620
चरण 1। अपने FlashDrive या छोटे आकार के लिए रूट FS को सिकोड़ें । इस चरण को छोड़ दें यदि आपका रूट FS समान या छोटा है तो फ्लैशड्राइव।
Resc CD के साथ बूट अपने रूट विभाजन को माउंट करें। अगले आदेश चलाएँ:
#make the kernel realize the LVM volumes are there
lvm vgchange -a y
#Before shrinking the file system, it is good practice to check it is all in order.
# Change /dev/ubuntu/root with your root lvm partition
e2fsck -f /dev/ubuntu/root
#After the check, resize2fs can be used to shrink the file system on the LVM volume
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
resize2fs -f -p /dev/ubuntu/root 6G
#The e2fsck check command could be run again to make sure the, now significantly smaller, root file system is OK.
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
resize2fs -f -p /dev/ubuntu/root 6G
#The lvreduce command reduces the size of LVM volumes.
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
lvm lvreduce -L6G /dev/ubuntu/root
#you resided root partition !
reboot
चरण 2. फ्लैशड्राइव तैयार करना: माइग्रेट करने के लिए
अपने पुराने रूट UUID पर एक नज़र डालें
blkid
#it will show something like:
#/dev/sda1: UUID="6b5085da-5b7c-4ca5-a907-1e527c87a478" TYPE="ext2"
#/dev/sda2: UUID="iZjCPX-AwGS-kEmg-zXPc-Z7ne-Xd3N-gXoPQd" TYPE="LVM2_member"
#We will need /dev/sda1's UUID later. Lets remember it (6b5085da-5b7c-4ca5-a907-1e527c87a478) for the future.
# Replace /dev/sdg with your FlashDrive. All data will be last!
fdisk /dev/sdg
make first partition (sdg1) about 500Mb as ext2/ext4
make second partition (sdg2) for example 6GB as LVM partition.
#replace ubuntu with the same LVM VolumeGroup for your root fs
#Extending VG with FlashDrive
vgextend ubuntu /dev/sdg2
modprobe dm-mirror
#Moving root partition to flash drive online :)
#Replace /dev/sdg2 with your Flash Drive's second partition
#Replace /dev/sda5 with your root drive
pvmove --verbose /dev/sda5 /dev/sdg2
#removing old root drive from VolumeGroup, so we can remove HDD from PC after manipulations. But not now.
vgreduce ubuntu /dev/sda5
#Creating boot partition.
#Replace /dev/sdg1 with your Flash Drive's first partition
mkfs -t ext4 -v /dev/sdg1
#Mounting first FlashDrive partition.
mkdir /mnt/boot
#Replace /dev/sdg1 with your Flash Drive's first partition
mount /dev/sdg1 /mnt/boot
#we will need some tools
apt-get install dump
#coping boot drive from HDD to FlashDrive first partition
#Replace /dev/sda1 (source) and /mnt/boot (destination) with your environments
(dump -0f - /dev/sda1) | ( cd /mnt/boot; restore -rf - )
#And let's not forget to restore boot sector (MBR):
# Replace /dev/sdg with FlashDrive disk path
grub-install /dev/sdg
#change UUID for /boot with the one we remember at the beginning of the Step 2 (6b5085da-5b7c-4ca5-a907-1e527c87a478).
vi /etc/fstab
#now we need to write changes to grub.
update-grub
#Now you can power off your PC.
poweroff
#Now you can replace old root FS's HDD.
#Do not forget configure your PC's BIOS to boot from your FlashDrive.
ए) यदि आपका ग्रब लोड किया गया है लेकिन यह इस लेख को पहले रीड में ओएस लोड करने में सक्षम नहीं है । यह देखने के लिए कि क्या ग्रब को देखने के लिए ls कमांड का प्रयास करें।
grub>ls
# Replace (hd0,msdos1) regard to previous output
grub>ls (hd0,msdos1)
# Replace (hd0,msdos1)/grub regard to previous output
grub>ls (hd0,msdos1)/grub
grub>configfile (hd0,msdos1)/grub/grub.cfg
सफल बूटिंग के बाद परिवर्तन स्थायी नहीं होते हैं, इसलिए आपको ग्रब अपडेट करना होगा
update-grub
बी) यदि आपको ग्रब बिल्कुल दिखाई नहीं देता है, तो बचाव सीडी को बूट करने के लिए उपयोग करें।
#and install grub
#Lets figure out new name of your FlashDrive
blkid
# Replace /dev/sda with new name of your FlashDrive which system shows you
grub-install /dev/sda
#Reboot without Rescue CD and go to point A)
reboot
चरण 3. AUFS USB फ्लैश ड्राइव पर रूट फाइल सिस्टम के लिए।
apt-get update
apt-get dist-upgrade
apt-get install aufs-tools
# Aufs as root with apparmor. Enter dhclient3 to complain mode
# Network interface without it wount start/
apt-get install apparmor-utils
aa-complain dhclient3
# Or disable apparmor
#/etc/init.d/apparmor stop
#update-rc.d -f apparmor remove
#aptitude remove apparmor apparmor-utils
echo aufs >> /etc/initramfs-tools/modules
अब / etc / initramfs-tools / script / init-bottom / __ rootaufs फ़ाइल बनाएं और अगली स्क्रिप्ट रखें:
#!/bin/sh
# Copyright 2008 Nicholas A. Schembri State College PA USA
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see
# <http://www.gnu.org/licenses/>.
# https://help.ubuntu.com/community/aufsRootFileSystemOnUsbFlash#rootaufs_Script
# Thank you Voyage Linux for the idea, http://voyage.hk/ Great job on release 0.5
#
# Tested with 8.04.1
# tested with 9.10
# tested with debian live 6.0.1
#
# ****************************************************************************************
#
# Change log
#
# 2008.08.01 Added debugging comments in "drop to a shell" section. grub option aufs=tmpfs-debug will stop the init script.
# reviewed *********** fix fstab on tmpfs ******************
# rootaufs failed when system was booted with /dev/xxx and fstab had uuid= info.
# BlaYO pointed out the best and simplest solution was to use grep -v. Grep replaces a sed one liner.
# Add the comment block to fstab
#
# 2009.12.07 Corrected issue caused by Apparmor.
# Name changed to __rootaufs.
#
# 2011.08.19 Changed if condition to avoid issue (sh: bad number) when $aufsdebug is not set.
# Now checks exists apparmor before delete.
#
# 2011.08.20 For work correctly with Debian Live 6.0.1 (http://live.debian.net/) two lines must be removed from rc.local modification part:
# 'mount -f /ro'
# 'echo aufs-tmpfs /rw tmpfs rw 0 0 >>/etc/mtab'
#
case $1 in
prereqs)
exit 0
;;
esac
export aufs
for x in $(cat /proc/cmdline); do
case $x in
root=*)
ROOTNAME=${x#root=}
;;
aufs=*)
aufs=${x#aufs=}
case $aufs in
tmpfs-debug)
aufs=tmpfs
aufsdebug=1
;;
esac
;;
esac
done
if [ "$aufs" != "tmpfs" ]; then
#not set in boot loader
#I'm not loved. good bye
exit 0
fi
# This is a simple overview of the steps needed to use aufs on the root file system and see the /rw and /ro branches.
# initramfs init-botton script
# move the root file system to aufs/unionfs readonly /ro
# root is mounted on ${rootmnt}
# create tmpfs on /rw
# create a aufs using /ro and /rw
# put some files on the tmpfs to fix mtab and fstab
# move aufs to rootmnt to finish the init process.
# No changes to the root file system are made by this script.
#
# Why!
# This will allow you to use a usb flash drive and control what is written to the drive.
# no need to rebuild the squashfs file just to add a program.
# boot to single user mode. The system works the way you expect. boot aufs=tmpfs and no changes are written to the flash.
# run ubuntu on an eeePC .
# Install
# Install ubuntu 8.04 Hardy. Hardy has aufs installed by default
# apt-get update
# apt-get dist-upgrade
# apt-get install aufs-tools
# echo aufs >> /etc/initramfs-tools/modules
# put this file in /etc/initramfs-tools/scripts/init-bottom/rootaufs
# chmod 0755 rootaufs
# # clean up menu.lst
# update-grub
# update-initramfs -u
# vi /boot/grub/menu.lst
# add aufs=tmpfs to the default entry.
# do not add this line to single user mode.
# boot to single user mode in order to install software.
# note: if your home account is on the root file system, your files are in ram and not saved.
#
echo
echo " root-aufs: Setting up aufs on ${rootmnt} as root file system "
echo
modprobe -q --use-blacklist aufs
if [ $? -ne 0 ]; then
echo root-aufs error: Failed to load aufs.ko
exit 0
fi
#make the mount points on the init root file system
mkdir /aufs
mkdir /rw
mkdir /ro
# mount the temp file system and move real root out of the way
mount -t tmpfs aufs-tmpfs /rw
mount --move ${rootmnt} /ro
if [ $? -ne 0 ]; then
echo root-aufs error: ${rootmnt} failed to move to /ro
exit 0
fi
mount -t aufs -o dirs=/rw:/ro=ro aufs /aufs
if [ $? -ne 0 ]; then
echo root-aufs error: Failed to mount /aufs files system
exit 0
fi
#test for mount points on aufs file system
[ -d /aufs/ro ] || mkdir /aufs/ro
[ -d /aufs/rw ] || mkdir /aufs/rw
# the real root file system is hidden on /ro of the init file system. move it to /ro
mount --move /ro /aufs/ro
if [ $? -ne 0 ]; then
echo root-aufs error: Failed to move /ro /aufs/ro
exit 0
fi
# tmpfs file system is hidden on /rw
mount --move /rw /aufs/rw
if [ $? -ne 0 ]; then
echo root-aufs error: Failed to move /rw /aufs/rw
exit 0
fi
#*********** fix fstab on tmpfs ******************
# test for /dev/sdx
# this is not on the real file system. This is created on the tmpfs each time the system boots.
# The init process will try to mount the root filesystem listed in fstab. / and swap must be removed.
# the root file system must be mounted on /ro not on /
if [ "0$aufsdebug" -eq 1 ]; then
echo " root-aufs debug: Remove the root file system and swap from fstab "
echo
echo
echo " ROOTNAME $ROOTNAME "
echo " resume $resume "
echo
echo ' BlaYO pointed out that grep can be used to quickly remove '
echo ' the root file system from fstab. '
echo
echo ' Thank you BlaYO for the debug info.'
echo
fi
# old code
# I'm sure that sed can do this in one step but I want to correct on the rootname not matching the root in fstab.
#cat /aufs/ro/etc/fstab|sed -e s/$ROOTNAME/\#$ROOTNAME/ -e s/$resume/\#$resume/ >/aufs/etc/fstab
#Add the comment block to fstab
cat <<EOF >/aufs/etc/fstab
#
# RootAufs has mounted the root file system in ram
#
# This fstab is in ram and the real fstab can be found /ro/etc/fstab
# the root file system ' / ' has been removed.
# All Swap files have been removed.
#
EOF
#remove root and swap from fstab
cat /aufs/ro/etc/fstab|grep -v ' / ' | grep -v swap >>/aufs/etc/fstab
if [ $? -ne 0 ]; then
echo root-aufs error: Failed to create /aufs/etc/fstab
#exit 0
fi
# add the read only file system to fstab
#ROOTTYPE=$(/lib/udev/vol_id -t ${ROOT})
ROOTTYPE=$(cat /proc/mounts|grep ${ROOT}|cut -d' ' -f3)
ROOTOPTIONS=$(cat /proc/mounts|grep ${ROOT}|cut -d' ' -f4)
echo ${ROOT} /ro $ROOTTYPE $ROOTOPTIONS 0 0 >>/aufs/etc/fstab
# S22mount on debian systems is not mounting /ro correctly after boot
# add to rc.local to correct what you see from df
#replace last case of exit with #exit
cat /aufs/ro/etc/rc.local|sed 's/\(.*\)exit/\1\#exit/' >/aufs/etc/rc.local
echo mount -f /ro >>/aufs/etc/rc.local
# add back the root file system. mtab seems to be created by one of the init proceses.
echo "echo aufs / aufs rw,xino=/rw/.aufs.xino,br:/rw=rw:/ro=ro 0 0 >>/etc/mtab" >>/aufs/etc/rc.local
echo "echo aufs-tmpfs /rw tmpfs rw 0 0 >>/etc/mtab" >>/aufs/etc/rc.local
echo exit 0 >>/aufs/etc/rc.local
# Copyright 2008 Joaquin I. Bogado Garcia
#fix para apparmor, se desactiva y listo ( From the lethe project. )
[ -e /scripts/init-bottom/_apparmor ] && rm /scripts/init-bottom/_apparmor
[ -e /aufs/etc/init.d/apparmor ] && rm /aufs/etc/init.d/apparmor
#build remountrw
echo \#!/bin/sh >/aufs/bin/remountrw
echo mount -o remount,rw ${ROOT} >>/aufs/bin/remountrw
chmod 0700 /aufs/bin/remountrw
#build remountro
echo \#!/bin/sh >/aufs/bin/remountro
echo mount -o remount,ro ${ROOT} >>/aufs/bin/remountro
chmod 0700 /aufs/bin/remountro
# This should drop to a shell. (rewrite)
if [ "0$aufsdebug" -eq 1 ]; then
echo
echo " root-aufs debug: mount --move /aufs ${rootmnt} "
echo
echo ' root-aufs debug: init will stop here. '
echo
exit 0
fi
mount --move /aufs ${rootmnt}
exit 0
हमें इस फ़ाइल के लिए अनुमतियां बदलने की आवश्यकता है:
chmod 0755 /etc/initramfs-tools/scripts/init-bottom/rootaufs
चरण 4. GRUB2 को बदलना।
cat /etc/grub.d/10_linux|sed s/'linux_entry "${OS}" "${version}" false'/'linux_entry "RO: ${OS}" "${version}" false'/ |sed s/'"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_EXTRA} ${GRUB_CMDLINE_LINUX_DEFAULT}"'/'"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_EXTRA} ${GRUB_CMDLINE_LINUX_DEFAULT} aufs=tmpfs"'/ >/etc/grub.d/06_custom
sed -i.orig -e \
"/{GRUB_DISABLE_RECOVERY}\" != \"xtrue\" ]; then/s/^.*$/ \
if [ 0 ]; then/" \
/etc/grub.d/06_custom
sed -i.orig -e \
"/in_submenu=:/s/^.*$/ \
/" \
/etc/grub.d/06_custom
sed -i.orig -e \
"/\"Previous Linux versions/s/^.*$/ \
echo ''/" \
/etc/grub.d/06_custom
rm /etc/grub.d/06_custom.orig
chmod 755 /etc/grub.d/06_custom
update-grub
update-initramfs -u