मैं अपने फेडोरा 14 पर Reliance Netconnect + के माध्यम से इंटरनेट कनेक्ट नहीं कर पा रहा हूं? यह विंडोज पर ठीक से काम कर रहा है।
जब भी मैं wvdial कमांड चलाता हूं, मैं नीचे त्रुटि देखता हूं:
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
डिवाइस से कनेक्ट करते समय मैं नीचे लॉग देखता हूं:
Jun 12 09:53:35 localhost kernel: [ 2180.144145] usb 4-2: new full speed USB device using uhci_hcd and address 2
Jun 12 09:53:35 localhost kernel: [ 2180.294153] usb 4-2: New USB device found, idVendor=12d1, idProduct=1505
Jun 12 09:53:35 localhost kernel: [ 2180.294163] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
Jun 12 09:53:35 localhost kernel: [ 2180.294171] usb 4-2: Product: HUAWEI Mobile
Jun 12 09:53:35 localhost kernel: [ 2180.294176] usb 4-2: Manufacturer: HUAÿWEI TECHNOLOGIES
Jun 12 09:53:35 localhost kernel: [ 2180.294182] usb 4-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Jun 12 09:53:35 localhost mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2"
Jun 12 09:53:35 localhost mtp-probe: bus: 4, device: 2 was not an MTP device
Jun 12 09:53:35 localhost kernel: [ 2180.670958] Initializing USB Mass Storage driver...
Jun 12 09:53:35 localhost kernel: [ 2180.671294] scsi5 : usb-storage 4-2:1.0
Jun 12 09:53:35 localhost kernel: [ 2180.671415] usbcore: registered new interface driver usb-storage
Jun 12 09:53:35 localhost kernel: [ 2180.671417] USB Mass Storage support registered.
Jun 12 09:53:36 localhost kernel: [ 2181.677229] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
Jun 12 09:53:37 localhost kernel: [ 2181.707188] sr1: scsi-1 drive
Jun 12 09:53:37 localhost kernel: [ 2181.709536] sr 5:0:0:0: Attached scsi generic sg2 type 5
रनिंग कमांड पर
usb_modeswitch -H -v 0x12d1 -p 0x1505
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 002 on bus 004 ...
Using endpoints 0x08 (out) and 0x87 (in)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUA�WEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.: �������������������
-------------------------
Sending Huawei control message ...
OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
मैं कमान से भी नीचे भागा लेकिन कोई किस्मत नहीं।
modprobe usbserial vendor=0x12d1 product=0x1505
उपरोक्त आदेश के बाद रॉन wvdial:
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
रिलायंस नेटकनेक्ट + को अपनी लिनक्स मशीन पर चलाने के लिए मैं क्या कर सकता हूं - फेडोरा 14