मैंने अपने कार्य केंद्र को वाईफाई से जोड़ने के लिए एक Wifi USB कुंजी खरीदी। इसने सप्ताह के बारे में काम किया, और फिर, वह प्रमाणित करने की कोशिश करता है, लेकिन मैं पासवर्ड दर्ज करने के लिए 3 बार प्रेरित नहीं हो सकता (जो सही है लेकिन विफल रहता है।
मैं Fedora 17 x 64 पर हूं, और मेरी कुंजी एक NETGEAR WNA3100M है
यहाँ अधिक विवरण है:
uname -a :
Linux pc-cyril 3.6.8-2.fc17.x86_64 #1 SMP Tue Nov 27 19:35:02 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
dmesg (the wifi key part, after plugged) :
[193300.392090] usb 2-2: USB disconnect, device number 7
[193302.789804] usb 2-2: new high-speed USB device number 8 using ehci_hcd
[193302.906005] usb 2-2: New USB device found, idVendor=0846, idProduct=9021
[193302.906012] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[193302.906016] usb 2-2: Product: NETGEAR WNA3100M
[193302.906019] usb 2-2: Manufacturer: Realtek
[193302.906021] usb 2-2: SerialNumber: 00e04c000001
[193302.907746] rtl8192cu: Chip version 0x11
[193303.008087] rtl8192cu: MAC address: 2c:b0:5d:6c:51:f2
[193303.008098] rtl8192cu: Board Type 0
[193303.008328] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[193303.008407] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[193303.056633] ieee80211 phy13: Selected rate control algorithm 'rtl_rc'
[193303.058737] rtlwifi: wireless switch is on
[193303.101172] rtl8192cu: MAC auto ON okay!
[193303.135277] rtl8192cu: Tx queue select: 0x05
[193303.514795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[193305.144082] wlan0: authenticate with 00:26:f2:76:f3:1d
[193305.168193] wlan0: send auth to 00:26:f2:76:f3:1d (try 1/3)
[193305.178009] wlan0: authenticated
[193305.178413] rtl8192cu 2-2:1.0: wlan0: disabling HT due to WEP/TKIP use
[193305.190193] wlan0: associate with 00:26:f2:76:f3:1d (try 1/3)
[193305.210486] wlan0: RX AssocResp from 00:26:f2:76:f3:1d (capab=0x411 status=0 aid=2)
[193305.210728] wlan0: associated
[193305.210745] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[193313.002990] wlan0: deauthenticated from 00:26:f2:76:f3:1d (Reason: 15)
[193313.011526] cfg80211: Calling CRDA to update world regulatory domain
[193313.033636] cfg80211: World regulatory domain updated:
[193313.033644] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[193313.033650] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[193313.033655] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[193313.033660] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[193313.033664] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[193313.033668] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[193313.033705] cfg80211: Calling CRDA for country: FR
[193313.038307] cfg80211: Regulatory domain changed to country: FR
[193313.038313] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[193313.038318] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[193313.038323] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[193313.038327] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[193313.038374] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[193313.894369] wlan0: authenticate with 00:26:f2:76:f3:1d
[193313.906507] wlan0: send auth to 00:26:f2:76:f3:1d (try 1/3)
[193314.107139] wlan0: send auth to 00:26:f2:76:f3:1d (try 2/3)
[193314.308066] wlan0: send auth to 00:26:f2:76:f3:1d (try 3/3)
[193314.509039] wlan0: authentication with 00:26:f2:76:f3:1d timed out
मुझे नहीं पता कि क्या चल रहा है, अगर यह महत्वपूर्ण है कि एक समस्या है, या कर्नेल का अपडेट है, लेकिन अब, मैं खो गया हूं: /
क्या आपके पास कोई विचार है कि क्या हो रहा है? धन्यवाद! :)