ब्लूटूथ डोंगल काम नहीं कर रहा है


0

मैं एक नया LogiLink BT0015 USB ब्लूटूथ डोंगल खरीदता हूं और इसे अपने डेबियन 9 सिस्टम पर इंस्टॉल करना चाहता हूं। स्थापना प्रक्रिया के बाद (ब्लूटूथ, ब्लूज़, ब्लूमैन पैकेज), डोंगल काम नहीं कर रहा है और डिवाइस नहीं दिखाया जाएगा।

हार्डवेयर:

  • ऑरेंज पीआई पीसी 2

सॉफ्टवेयर:

  • डेबियन स्ट्रेच

कर्नेल:

  • लिनक्स संस्करण ३.१०.६५ (नारंगी @ नारंगी-ऑल-सीरीज़) (gcc संस्करण ४.१.३ २०१५१३१३ (प्रीलेरेज़) (लिनारो GCC ४.१-०४.०१-३)) # ५५ एसएमपी प्रीमेप

Dmesg -l इरेट का आउटपुट

[    4.512939] Warning: can not find np for pmic0.
[    4.512983] Warning: can not find np for pmic1.
[    4.513071] add_sys_pwr_dm: get ldo name  for id: vcc-lpddr failed
[    4.513091] add_sys_pwr_dm: get ldo name  for id: vcc-pl failed
[    4.513109] add_sys_pwr_dm: axpdummy_ldo6 ldo already alwayson.
[    4.513141] add_sys_pwr_dm: vcc-pc not sys id.
[    4.513187] Warning: can not find np for dynamic_standby_para.
[    4.670401] sunxi_bootup_extend_probe: bootup extend state 1
[    4.670421] bootup extend probe ok
[    4.670978] failed to get easy_light_used assign
[    4.670996] failed to get standby led pin assign
[    5.614787] Get boot type cmd line fail
[    6.241953] hci: request ohci0-controller gpio:354
[    7.438870] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
[    7.446360] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
[    7.501222] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[    7.502040] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[    7.502856] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[    7.503671] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
[    7.589050] AUDIO :get regulator name failed .
[    7.995323] sd 0:0:0:0: [sda] No Caching mode page found
[    7.995327] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    8.023979] sd 0:0:0:0: [sda] No Caching mode page found
[    8.023984] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    8.349935] sd 0:0:0:0: [sda] No Caching mode page found
[    8.355754] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    8.884609] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[    8.898683] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[   11.476575] [VFE_ERR]vfe sensor register check error at input_num = 0
[   12.538082] node ir_addr_code16 get failed!
[   12.543067] sunxi_ir_startup: cir get supply err

Syslog का आउटपुट

Jan  9 17:29:16 devserver1 systemd[1]: Starting Bluetooth service...
Jan  9 17:29:16 devserver1 bluetoothd[7124]: Bluetooth daemon 5.43
Jan  9 17:29:16 devserver1 systemd[1]: Started Bluetooth service.
Jan  9 17:29:16 devserver1 bluetoothd[7124]: Starting SDP server
Jan  9 17:29:16 devserver1 bluetoothd[7124]: Bluetooth management interface 1.3 initialized
Jan  9 17:29:16 devserver1 dbus[2146]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan  9 17:29:16 devserver1 NetworkManager[2154]: <info>  [1547051356.3753] bluez: use BlueZ version 5
Jan  9 17:29:16 devserver1 systemd[1]: Starting Hostname Service...
Jan  9 17:29:16 devserver1 dbus[2146]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan  9 17:29:16 devserver1 systemd[1]: Started Hostname Service.

पूरा ब्लूमैन syslog

Jan 11 13:46:31 devserver1 dbus[2157]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Jan 11 13:46:31 devserver1 systemd[1]: Starting Bluetooth service...
Jan 11 13:46:31 devserver1 bluetoothd[3078]: Bluetooth daemon 5.43
Jan 11 13:46:31 devserver1 dbus[2157]: [system] Successfully activated service 'org.bluez'
Jan 11 13:46:31 devserver1 systemd[1]: Started Bluetooth service.
Jan 11 13:46:31 devserver1 bluetoothd[3078]: Starting SDP server
Jan 11 13:46:31 devserver1 dbus[2157]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan 11 13:46:31 devserver1 bluetoothd[3078]: Bluetooth management interface 1.3 initialized
Jan 11 13:46:31 devserver1 NetworkManager[2172]: <info>  [1547210791.9408] bluez: use BlueZ version 5
Jan 11 13:46:31 devserver1 systemd[1]: Starting Hostname Service...
Jan 11 13:46:32 devserver1 dbus[2157]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan 11 13:46:32 devserver1 systemd[1]: Started Hostname Service.
Jan 11 13:46:32 devserver1 dbus[2157]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Jan 11 13:46:32 devserver1 dbus-daemon[2876]: Activating via systemd: service name='org.bluez.obex' unit='obex.service'
Jan 11 13:46:32 devserver1 systemd[2851]: Starting Bluetooth OBEX service...
Jan 11 13:46:32 devserver1 obexd[3101]: OBEX daemon 5.43
Jan 11 13:46:32 devserver1 dbus-daemon[2876]: Successfully activated service 'org.bluez.obex'
Jan 11 13:46:32 devserver1 systemd[2851]: Started Bluetooth OBEX service.
Jan 11 13:46:33 devserver1 org.blueman.Mechanism[2157]: Unable to init server: Could not connect: Connection refused
Jan 11 13:46:33 devserver1 org.blueman.Mechanism[2157]: Unable to init server: Could not connect: Connection refused
Jan 11 13:46:33 devserver1 blueman-mechanism: Starting blueman-mechanism
Jan 11 13:46:33 devserver1 dbus[2157]: [system] Successfully activated service 'org.blueman.Mechanism'
Jan 11 13:46:33 devserver1 blueman-mechani[3100]: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Jan 11 13:46:33 devserver1 blueman-mechanism: loading Network
Jan 11 13:46:33 devserver1 blueman-mechanism: loading Rfcomm
Jan 11 13:46:33 devserver1 blueman-mechanism: loading RfKill
Jan 11 13:46:33 devserver1 blueman-mechanism: loading Ppp
Jan 11 13:47:03 devserver1 blueman-mechanism: Exiting
Jan 11 13:47:27 devserver1 dbus[2157]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Jan 11 13:47:28 devserver1 org.blueman.Mechanism[2157]: Unable to init server: Could not connect: Connection refused
Jan 11 13:47:28 devserver1 org.blueman.Mechanism[2157]: Unable to init server: Could not connect: Connection refused
Jan 11 13:47:28 devserver1 blueman-mechanism: Starting blueman-mechanism
Jan 11 13:47:28 devserver1 dbus[2157]: [system] Successfully activated service 'org.blueman.Mechanism'
Jan 11 13:47:28 devserver1 blueman-mechani[3272]: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Jan 11 13:47:28 devserver1 blueman-mechanism: loading Network
Jan 11 13:47:28 devserver1 blueman-mechanism: loading Rfcomm
Jan 11 13:47:28 devserver1 blueman-mechanism: loading Ppp
Jan 11 13:47:43 devserver1 kernel: [  156.868618] task: ffffffc01ac04380 ti: ffffffc012c98000 task.ti: ffffffc012c98000
Jan 11 13:47:43 devserver1 kernel: [  156.876848] PC is at 0x7f98312784
Jan 11 13:47:43 devserver1 kernel: [  156.880684] LR is at 0x7f94745484
Jan 11 13:47:43 devserver1 kernel: [  156.884344] pc : [<0000007f98312784>] lr : [<0000007f94745484>] pstate: 60000000
Jan 11 13:47:43 devserver1 kernel: [  156.892615] sp : 0000007fdda3eb20
Jan 11 13:47:43 devserver1 kernel: [  156.896236] x29: 0000007fdda3eb30 x28: 0000007f958812f0
Jan 11 13:47:43 devserver1 kernel: [  156.902193] x27: 0000007fdda3f0d0 x26: 0000005581f301d0
Jan 11 13:47:43 devserver1 kernel: [  156.908009] x25: 0000000000000002 x24: 0000000000001000
Jan 11 13:47:43 devserver1 kernel: [  156.914040] x23: 00000000000001c0 x22: 0000000000000001
Jan 11 13:47:43 devserver1 kernel: [  156.919861] x21: 0000007f9477a000 x20: 000000558251c588
Jan 11 13:47:43 devserver1 kernel: [  156.925978] x19: 0000000004000000 x18: 0000000000000000
Jan 11 13:47:43 devserver1 kernel: [  156.931921] x17: 0000007f98312760 x16: 0000007f9477a348
Jan 11 13:47:43 devserver1 kernel: [  156.937731] x15: 00000000000000b9 x14: ffffffffffffffe0
Jan 11 13:47:43 devserver1 kernel: [  156.943749] x13: 0000000000000000 x12: 0000000000000000
Jan 11 13:47:43 devserver1 kernel: [  156.949558] x11: 0101010101010101 x10: 0000007fdda3ea10
Jan 11 13:47:43 devserver1 kernel: [  156.955661] x9 : 0000000000000001 x8 : 0000000000000117
Jan 11 13:47:43 devserver1 kernel: [  156.961640] x7 : 0000000000000000 x6 : 0000000000000000
Jan 11 13:47:43 devserver1 kernel: [  156.967451] x5 : 0000007fdda3ea3c x4 : 0000007f98529108
Jan 11 13:47:43 devserver1 kernel: [  156.973479] x3 : 0000007f98529000 x2 : 0000000000000002
Jan 11 13:47:43 devserver1 kernel: [  156.979636] x1 : 0000000000000002 x0 : 0000007f94757730
Jan 11 13:47:43 devserver1 kernel: [  156.985446]
Jan 11 13:47:58 devserver1 blueman-mechanism: Exiting
Jan 11 13:49:13 devserver1 kernel: [  246.102269] blueman-manager[3726]: syscall 279
Jan 11 13:49:13 devserver1 kernel: [  246.107203] Code: aa0503e4 aa0603e5 aa0703e6 d4000001 (b13ffc1f)
Jan 11 13:49:13 devserver1 kernel: [  246.113939] CPU: 3 PID: 3726 Comm: blueman-manager Not tainted 3.10.65 #55
Jan 11 13:49:13 devserver1 kernel: [  246.121454] task: ffffffc03afe2440 ti: ffffffc028dc8000 task.ti: ffffffc028dc8000
Jan 11 13:49:13 devserver1 kernel: [  246.129657] PC is at 0x7fac8a2784
Jan 11 13:49:13 devserver1 kernel: [  246.133302] LR is at 0x7fa8cd5484
Jan 11 13:49:13 devserver1 kernel: [  246.136920] pc : [<0000007fac8a2784>] lr : [<0000007fa8cd5484>] pstate: 60000000
Jan 11 13:49:13 devserver1 kernel: [  246.145079] sp : 0000007fe2c70810
Jan 11 13:49:13 devserver1 kernel: [  246.148702] x29: 0000007fe2c70820 x28: 0000007fa9e11270
Jan 11 13:49:13 devserver1 kernel: [  246.154558] x27: 0000007fe2c70dc0 x26: 000000557d31e1d0
Jan 11 13:49:13 devserver1 kernel: [  246.160365] x25: 0000000000000002 x24: 0000000000001000
Jan 11 13:49:13 devserver1 kernel: [  246.166928] x23: 00000000000001c0 x22: 0000000000000001
Jan 11 13:49:13 devserver1 kernel: [  246.172801] x21: 0000007fa8d0a000 x20: 000000557d9aef38
Jan 11 13:49:13 devserver1 kernel: [  246.178609] x19: 0000000004000000 x18: 0000000000000000
Jan 11 13:49:13 devserver1 kernel: [  246.184439] x17: 0000007fac8a2760 x16: 0000007fa8d0a348
Jan 11 13:49:13 devserver1 kernel: [  246.190246] x15: 00000000000000b9 x14: ffffffffffffffe0
Jan 11 13:49:13 devserver1 kernel: [  246.196074] x13: 0000000000000000 x12: 0000000000000000
Jan 11 13:49:13 devserver1 kernel: [  246.201971] x11: 0101010101010101 x10: 0000007fe2c70700
Jan 11 13:49:14 devserver1 kernel: [  246.207779] x9 : 0000000000000001 x8 : 0000000000000117
Jan 11 13:49:14 devserver1 kernel: [  246.213607] x7 : 0000000000000000 x6 : 0000000000000000
Jan 11 13:49:14 devserver1 kernel: [  246.219414] x5 : 0000007fe2c7072c x4 : 0000007facab9108
Jan 11 13:49:14 devserver1 kernel: [  246.225242] x3 : 0000007facab9000 x2 : 0000000000000002
Jan 11 13:49:14 devserver1 kernel: [  246.231085] x1 : 0000000000000002 x0 : 0000007fa8ce7730
Jan 11 13:49:14 devserver1 kernel: [  246.236896]

blueman- प्रबंधक लॉग

यहाँ छवि विवरण दर्ज करें

ब्लूमैन-एडेप्टर लॉग

यहाँ छवि विवरण दर्ज करें

किसी को भी एक विचार है, समस्या को ठीक करने के लिए?


1
प्लग / अनप्लग करने के बाद dmesg & syslog में कुछ भी?
Xen2050

आप किस कर्नेल संस्करण का उपयोग कर रहे हैं?
गेब्रियलमेलिनी

@TDK मैंने कर्नेल नंबर 3.10.65 का उपयोग किया।
ZPascal

का आउटपुट प्रदान करें: sudo dmesg -l
इरेट

@ AtomiX84 मैंने पहली पोस्ट अपडेट की।
ZPascal
हमारी साइट का प्रयोग करके, आप स्वीकार करते हैं कि आपने हमारी Cookie Policy और निजता नीति को पढ़ और समझा लिया है।
Licensed under cc by-sa 3.0 with attribution required.