मैं DigitalOcean गाइड का अनुसरण करते हुए Centos पर एक OpenVPN स्थापित करने की कोशिश कर रहा हूं https://www.digitalocean.com/community/tutorials/how-to-setup-and-configure-an-openvpn-server-on-centos-7
और मैंने सभी चरणों को पूरा किया है, लेकिन जब मैं अपने विंडोज़ के माध्यम से दूरस्थ होस्ट से संपर्क करने की कोशिश करता हूं OpenVPN गुई कि मैं व्यवस्थापक के रूप में चलाता हूं मुझे निम्नलिखित मिलता है:
Sat Apr 21 22:32:24 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]<MyremoteIP>:1194
Sat Apr 21 22:32:24 2018 UDP link local (bound): [AF_INET][undef]:1194
Sat Apr 21 22:32:24 2018 UDP link remote: [AF_INET]<MyremoteIP>
Sat Apr 21 22:32:24 2018 OpenSSL: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed
Sat Apr 21 22:32:24 2018 TLS_ERROR: BIO read tls_read_plaintext error
Sat Apr 21 22:32:24 2018 TLS Error: TLS object -> incoming plaintext read error
Sat Apr 21 22:32:24 2018 TLS Error: TLS handshake failed
सर्वर की ओर:
sudo journalctl -xe
Apr 21 22:32:24 vpn-smb openvpn[1061]: Sat Apr 21 22:32:24 2018
82.183.59.233:1194 TLS: Initial packet from [AF_INET]<my_host_ip>:1194, sid=f76ecc9a 7483d5de
Apr 21 22:33:24 vpn-smb openvpn[1061]: Sat Apr 21 22:33:24 2018 <my_host_ip>:1194 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Apr 21 22:33:24 vpn-smb openvpn[1061]: Sat Apr 21 22:33:24 2018 <my_host_ip>:1194 TLS Error: TLS handshake failed
वे कम से कम संवाद कर रहे हैं तो मुझे लगता है कि नेटवर्क भाग सही सेट है। हालाँकि, मैंने बस आसान-रेसा पैकेज का इस्तेमाल किया है, जो ऊपर दिए गए गाइड में उल्लिखित है, जो मैंने माना कि प्रमाणपत्रों के साथ मुद्दों को हल करेगा।
मैंने बिना किसी लाभ के दो बार प्रमाण पत्र के सेट को रीमेक किया है। यह हो सकता है कि मैं सर्वर / क्लाइंट के सीएन / नाम भागों के साथ कुछ याद कर रहा हूं, लेकिन मुझे यकीन नहीं है कि मैं वास्तव में इसे काम करने के लिए बदल सकता हूं। क्या वास्तव में विफल होने का कोई तरीका नहीं है?
ग्राहक पक्ष पर मेरा OVPN:
myVPN.ovpn
client
tls-client
ca ca.crt
cert enrm.crt
key enrm.key
tls-crypt smb\\my.tlsauth
remote-cert-eku "TLS Web Client Authentication"
proto udp
remote my_vpn_ip 1194 udp
dev tun
topology subnet
pull
user nobody
group nobody
मैं उलझन में हूं..
संबंधित प्रकार:
openvpn TLS सेंटोस 7 में हैंडशेक त्रुटि
OpenVPN एक डिस्क पर टीएलएस हैंडशेक त्रुटि, स्व हस्ताक्षरित प्रमाण पत्र, चूक
EDIT: यहाँ सर्वर के लिए मान है
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh2048.pem 2048
dh /etc/openvpn/dh2048.pem
# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
topology subnet
remote-cert-eku "TLS Web Client Authentication"
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
tls-crypt /etc/openvpn/saturnus.tlsauth
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that v2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC
# Enable compression on the VPN link and push the
# option to the client (v2.4+ only, for earlier
# versions see below)
;compress lz4-v2
;push "compress lz4-v2"
# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
# Notify the client that when the server restarts so it
# can automatically reconnect.
explicit-exit-notify 1
1
क्या आपने क्लाइंट और सर्वर दोनों पर तारीख की जाँच की है? गलत तारीखें एसएसएल सत्यापन की विफलता का कारण बन सकती हैं अगर वे प्रमाण पत्र की तिथि अवधि के बाहर हैं।
—
davidgo
@ दाविदगो - हाय। मैंने सीट्स तैयार करने के लिए गाइड से easy_rsa पैकेज का उपयोग किया - मैंने केवल उन दिनों की संख्या निर्दिष्ट की जो उन्हें मान्य होनी चाहिए, लेकिन मैं वैसे भी डबलचेक करने जा रहा हूं - अच्छा बिंदु।
—
enrm
सर्वर:
—
enrm
Validity Not Before: Apr 21 22:28:49 2018 GMT Not After : Apr 18 22:28:49 2028 GMT ग्राहक के साथ भी ..
हां, लेकिन क्लाइंट पर तारीख क्या है?
—
davidgo
साथ ही सर्वर साइड का कॉन्फिगर दिखाओ! आप "tls-crypt" का उपयोग कर रहे हैं, और शायद यह समस्या का एक हिस्सा है।
—
Ralf Hildebrandt