तो, मैं एक अजीब समस्या हो रही हूँ। मेरे पास एक सर्वर है, कि जब मैं SSH में कोशिश करता हूं, तो पहले कनेक्शन पर सही पासवर्ड टाइप करने पर तुरंत कनेक्शन बंद कर देता है। हालाँकि, यदि मैं पहले प्रयास में एक गलत पासवर्ड दर्ज करता हूं, और फिर दूसरे या तीसरे प्रॉम्प्ट पर एक सही पासवर्ड दर्ज करता हूं, तो यह सफलतापूर्वक मुझे कंप्यूटर में प्रवेश कर जाता है। इसी तरह, जब मैं सार्वजनिक कुंजी प्रमाणीकरण का उपयोग करने का प्रयास करता हूं, तो मुझे तत्काल बंद कनेक्शन मिलता है। अगर, हालांकि, मैं अपनी कुंजी फ़ाइल के लिए एक गलत पासवर्ड दर्ज करता हूं, उसके बाद एक और गलत पासवर्ड, एक बार जब यह पासवर्ड प्रमाणीकरण के लिए बदल जाता है, तो मैं सफलतापूर्वक दूसरे या तीसरे संकेत पर सही पासवर्ड प्रदान करने के लिए लॉग इन कर सकता हूं।
मशीन Red Hat Enterprise Linux सर्वर रिलीज़ 6.2 (सैंटियागो) चला रही है, और प्रमाणीकरण के लिए LDAP और PAM का उपयोग कर रही है। इस पर डिबगिंग शुरू करने के बारे में कोई विचार? मुझे बताएं कि मुझे कौन सी फाइल प्रदान करनी है और मुझे यह करने में खुशी होगी।
यहाँ कुछ डिबगिंग जानकारी है। निम्न कोड ब्लॉक क्रम में इन 3 परिदृश्यों का प्रतिनिधित्व करते हैं: 1) पहली कोशिश पर निजी-कुंजी पासवर्ड को ठीक करें, 2) निजी-कुंजी को छोड़ें, पहली कोशिश पर नियमित पासवर्ड को सही करें, 3) निजी-कुंजी को छोड़ दें, जानबूझकर खराब पासवर्ड दर्ज करें, फिर अच्छा दर्ज करें ... यह एकमात्र ऐसा परिदृश्य है जो वास्तव में मुझे कनेक्ट करता है।
OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to [removed for privacy].
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/trevor/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /home/trevor/.ssh/id_rsa type 1
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048
debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048
debug1: identity file /home/trevor/.ssh/id_rsa-cert type -1
debug1: identity file /home/trevor/.ssh/id_dsa type -1
debug1: identity file /home/trevor/.ssh/id_dsa-cert type -1
debug1: identity file /home/trevor/.ssh/id_ecdsa type -1
debug1: identity file /home/trevor/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "[removed]" from file "/home/trevor/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trevor/.ssh/known_hosts:90
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-dss-cert-v00@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 120/256
debug2: bits set: 531/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA cb:1c:78:3f:f7:7d:8a:10:27:86:a3:12:0c:27:f4:19
debug3: load_hostkeys: loading entries for host "[removed]" from file "/home/trevor/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trevor/.ssh/known_hosts:90
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "[removed]" from file "/home/trevor/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trevor/.ssh/known_hosts:80
debug3: load_hostkeys: loaded 1 keys
debug1: Host '[removed]' is known and matches the RSA host key.
debug1: Found key in /home/trevor/.ssh/known_hosts:90
debug2: bits set: 541/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/trevor/.ssh/id_rsa (0x7f3a228127d0)
debug2: key: /home/trevor/.ssh/id_dsa ((nil))
debug2: key: /home/trevor/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug1: No valid Key exchange context
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_1000' not found
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_1000' not found
debug1: Unspecified GSS failure. Minor code may provide more information
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_1000' not found
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/trevor/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 279
debug2: input_userauth_pk_ok: fp 9c:b0:15:a4:92:9c:a5:31:8b:00:ea:f6:cb:e1:96:17
debug3: sign_and_send_pubkey: RSA 9c:b0:15:a4:92:9c:a5:31:8b:00:ea:f6:cb:e1:96:17
debug1: key_parse_private_pem: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/home/trevor/.ssh/id_rsa':
debug1: read PEM private key done: type RSA
Connection closed by [removed_ip]
अब मैं निजी कुंजी को छोड़ता हूं, और पहले प्रयास में सही उपयोगकर्ता पासवर्ड का उपयोग करता हूं:
Enter passphrase for key '/home/trevor/.ssh/id_rsa':
debug2: no passphrase given, try next key
debug1: Trying private key: /home/trevor/.ssh/id_dsa
debug3: no such identity: /home/trevor/.ssh/id_dsa
debug1: Trying private key: /home/trevor/.ssh/id_ecdsa
debug3: no such identity: /home/trevor/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
[user]@[server]'s password:
debug3: packet_send2: adding [##] (len [##] padlen [#] extra_pad [##])
debug2: we sent a password packet, wait for reply
Connection closed by [removed_ip]
अंत में मैं निजी कुंजी को छोड़ देता हूं, एक गलत पासवर्ड दर्ज करता हूं, और फिर 2 प्रयास पर सही पासवर्ड दर्ज करता हूं, यह दृष्टिकोण अंत में मुझे अंदर जाने देता है
debug1: Next authentication method: password
[user]@[server]'s password:
debug3: packet_send2: adding [##] (len [##] padlen [#] extra_pad [##])
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
Permission denied, please try again.
[user]@[server]'s password:
debug3: packet_send2: adding [##] (len [##] padlen [##] extra_pad [#])
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to [server] ([[server_ip]]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug2: callback start
debug2: x11_get_proto: /usr/bin/xauth list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug1: Requesting authentication agent forwarding.
debug2: channel 0: request auth-agent-req@openssh.com confirm 0
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug3: Ignored env LANGUAGE
debug3: Ignored env KDE_MULTIHEAD
debug3: Ignored env KDE_SESSION_VERSION
debug3: Ignored env KONSOLE_DBUS_SERVICE
debug3: Ignored env LOGNAME
debug3: Ignored env WINDOWPATH
debug3: Ignored env GTK_MODULES
debug3: Ignored env GTK2_RC_FILES
debug3: Ignored env KDE_FULL_SESSION
debug3: Ignored env SHLVL
debug3: Ignored env DBUS_SESSION_BUS_ADDRESS
debug3: Ignored env PATH
debug3: Ignored env USER
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env DEFAULTS_PATH
debug3: Ignored env GTK_RC_FILES
debug3: Ignored env WINDOWID
debug3: Ignored env XCURSOR_SIZE
debug3: Ignored env XDG_CONFIG_DIRS
debug3: Ignored env XDM_MANAGED
debug3: Ignored env XDG_DATA_DIRS
debug3: Ignored env DM_CONTROL
debug3: Ignored env _
debug3: Ignored env DISPLAY
debug3: Ignored env PWD
debug3: Ignored env XCURSOR_THEME
debug3: Ignored env GS_LIB
debug3: Ignored env COLORFGBG
debug3: Ignored env KDE_SESSION_UID
debug3: Ignored env SSH_AGENT_PID
debug3: Ignored env XDG_SESSION_COOKIE
debug3: Ignored env OLDPWD
debug3: Ignored env TERM
debug3: Ignored env PROFILEHOME
debug3: Ignored env SESSION_MANAGER
debug3: Ignored env UBUNTU_MENUPROXY
debug3: Ignored env QT_PLUGIN_PATH
debug3: Ignored env SSH_AUTH_SOCK
debug3: Ignored env KONSOLE_DBUS_SESSION
debug3: Ignored env DESKTOP_SESSION
debug3: Ignored env MANDATORY_PATH
debug3: Ignored env SHELL_SESSION_ID
debug3: Ignored env HOME
debug3: Ignored env SHELL
debug3: Ignored env GREP_OPTIONS
debug3: Ignored env GREP_COLOR
debug3: Ignored env PAGER
debug1: Sending env LC_CTYPE = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env LSCOLORS
debug3: Ignored env rvm_prefix
debug3: Ignored env rvm_path
debug3: Ignored env __array_start
debug3: Ignored env rvm_bin_path
debug3: Ignored env escape_flag
debug3: Ignored env _first
debug3: Ignored env _second
debug3: Ignored env rvm_version
debug3: Ignored env RUBY_VERSION
debug3: Ignored env GEM_HOME
debug3: Ignored env GEM_PATH
debug3: Ignored env MY_RUBY_HOME
debug3: Ignored env IRBRC
debug3: Ignored env rvm_alias_expanded
debug3: Ignored env rvm_docs_type
debug3: Ignored env rvm_gemstone_package_file
debug3: Ignored env rvm_gemstone_url
debug3: Ignored env rvm_niceness
debug3: Ignored env rvm_nightly_flag
debug3: Ignored env rvm_proxy
debug3: Ignored env rvm_quiet_flag
debug3: Ignored env rvm_ruby_file
debug3: Ignored env rvm_ruby_make
debug3: Ignored env rvm_ruby_make_install
debug3: Ignored env rvm_ruby_mode
debug3: Ignored env rvm_script_name
debug3: Ignored env rvm_sdk
debug3: Ignored env rvm_silent_flag
debug3: Ignored env rvm_wrapper_name
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: X11 forwarding request accepted on channel 0
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: [DateTime removed] from [location removed]
जैसा कि आप डिबगिंग कोड से बता सकते हैं, मेरा नाम ट्रेवर है। सहायता के लिए धन्यवाद! मुझे पता है कि मुझे क्या पैम फ़ाइलों को शामिल करने की आवश्यकता है।
टिप्पणियों में प्रति अनुरोध, यहां कुछ और लॉग / डीबगिंग जानकारी दी गई है।
/ var / लॉग / सुरक्षित (मेरा उपयोगकर्ता नाम twhitney है):
Oct 9 12:01:26 [server] sshd[25087]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=[removed] user=twhitney
Oct 9 12:01:26 [server] sshd[25087]: pam_krb5[25087]: authentication fails for 'twhitney' (twhitney@[domain]): Authentication failure (Decrypt integrity check failed)
Oct 9 12:01:26 [server] sshd[25087]: pam_ldap: ldap_starttls_s: Operations error
Oct 9 12:01:28 [server] sshd[25087]: Failed password for twhitney from [server_ip] port 47541 ssh2
Oct 9 12:01:32 [server] sshd[25087]: Accepted password for twhitney from [server_ip] port 47541 ssh2
Oct 9 12:01:32 [server] sshd[25087]: pam_unix(sshd:session): session opened for user twhitney by (uid=0)
यहाँ मुख्य सुराग शायद "pam_ldap: ldap_starttls_s: संचालन त्रुटि" है, मुझे इसमें कुछ शोध करना होगा।
अगले, पैम विन्यास हैं। मैं /etc/pam.d/system-auth से शुरू करूँगा:
auth required pam_env.so
auth sufficient pam_unix.so nullok try_first_pass
auth requisite pam_succeed_if.so uid >= 500 quiet
auth sufficient pam_sss.so use_first_pass
auth required pam_deny.so
account required pam_unix.so broken_shadow
account sufficient pam_localuser.so
account sufficient pam_succeed_if.so uid < 500 quiet
account [default=bad success=ok user_unknown=ignore] pam_sss.so
account required pam_permit.so
password requisite pam_cracklib.so try_first_pass retry=3 type=
password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok
password sufficient pam_sss.so use_authok
password required pam_deny.so
session required pam_oddjob_mkhomedir.so skel=/etc/skel/ umask=0027
session optional pam_keyinit.so revoke
session required pam_limits.so
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session sufficient pam_sss.so
session required pam_unix.so
और अब /etc/pam.d/password-auth:
auth required pam_env.so
auth sufficient pam_unix.so nullok try_first_pass
auth requisite pam_succeed_if.so uid >= 500 quiet
auth sufficient pam_krb5.so use_first_pass
auth sufficient pam_ldap.so use_first_pass
auth required pam_deny.so
account required pam_unix.so broken_shadow
account sufficient pam_localuser.so
account sufficient pam_succeed_if.so uid < 500 quiet
account [default=bad success=ok user_unknown=ignore] pam_ldap.so
account [default=bad success=ok user_unknown=ignore] pam_krb5.so
account required pam_permit.so
password requisite pam_cracklib.so try_first_pass retry=3 type=
password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok
password sufficient pam_krb5.so use_authtok
password sufficient pam_ldap.so use_authtok
password required pam_deny.so
session optional pam_keyinit.so revoke
session required pam_limits.so
session optional pam_oddjob_mkhomedir.so skel=/etc/skel/ umask=0027
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session required pam_unix.so
session optional pam_krb5.so
session optional pam_ldap.so
किसी भी प्रकाश के लिए फिर से धन्यवाद आप मेरे पहेली पर बहा सकते हैं!
2
ssh -vvv होस्ट करें और हमें आउटपुट प्रदान करें (दोनों मामलों में)
—
एलेक्सिस
आपको पैम कॉन्फिगरेशन भी प्रदान करना चाहिए।
—
२०:२०
पैम कॉन्फिगर्स के लिए, क्या आप अभी सब कुछ चाहते हैं
—
18
/etc/pam.d/? क्योंकि उनमें से बहुत कुछ है।
क्या आप / var / log / safe में देख सकते हैं और हमें प्रासंगिक लॉगिन जानकारी दिखा सकते हैं? PAM कॉन्फिगर्स के लिए, क्या आप हमें सिस्टम-ऑर्ट-पासवर्ड और पासवर्ड-ऑस्ट्रल्ट दिखा सकते हैं?
—
vicfn
हे सब लोग, मैंने कुछ और लॉग / डीबग जानकारी जोड़ी, मुझे बताएं कि क्या आप किसी भी प्रकाश को बहा सकते हैं। एक बार फिर धन्यवाद!
—
पाइराज