jQuery 1.5 में "आस्थगित ऑब्जेक्ट्स" कहते हैं। वे क्या हैं, और वे वास्तव में क्या करते हैं?
jQuery 1.5 में "आस्थगित ऑब्जेक्ट्स" कहते हैं। वे क्या हैं, और वे वास्तव में क्या करते हैं?
जवाबों:
आस्थगित वस्तु
JQuery 1.5 के रूप में, आस्थगित ऑब्जेक्ट स्व-प्रबंधित कॉलबैक कतार में कई कॉलबैक को पंजीकृत करने के लिए एक तरीका प्रदान करता है, कॉलबैक कतारों को उचित रूप में लागू करता है, और किसी भी तुल्यकालिक या अतुल्यकालिक फ़ंक्शन की सफलता या विफलता की स्थिति को रिले करता है।
आस्थगित तरीके:
कार्रवाई में स्थगित:
$.get("test.php").done(
function(){ alert("$.get succeeded"); }
);
$.get("test.php")
.done(function(){ alert("$.get succeeded"); })
.fail(function(){ alert("$.get failed!"); });और ऐसा लगता है कि मौजूदा अजाक्स () विधि कॉलबैक को सेटिंग्स में घोषित किए जाने के बजाय जंजीर में डाला जा सकता है:
var jqxhr = $.ajax({ url: "example.php" })
.success(function() { alert("success"); })
.error(function() { alert("error"); })
.complete(function() { alert("complete"); });एरिक Hynds ब्लॉग पोस्ट से कार्य उदाहरण : http://jsfiddle.net/ehynds/Mrqf8/
jqXHR
JQuery 1.5 के रूप में, $ .ajax () विधि jXHR ऑब्जेक्ट देता है, जो XMLHTTPRequest ऑब्जेक्ट का सुपरसेट है। अधिक जानकारी के लिए, .JXHR $ .ajax प्रविष्टि का अनुभाग देखें
से jQuery 1.5 जारी :
डिफेंडेड ओबीजेसीटीएस
अजाक्स मॉड्यूल के पुनर्लेखन के साथ एक नई सुविधा शुरू की गई जिसे सार्वजनिक रूप से भी उपलब्ध कराया गया था: आस्थगित वस्तुएं । यह एपीआई आपको रिटर्न मानों के साथ काम करने की अनुमति देता है जो तुरंत मौजूद नहीं हो सकता है (जैसे कि एसिंक्रोनस अजाक्स अनुरोध से वापसी परिणाम)। इसके अतिरिक्त यह आपको कई ईवेंट हैंडलर (ऐसा कुछ जो पहले अजाक्स एपीआई में संभव नहीं था) संलग्न करने की सुविधा देता है।
इसके अतिरिक्त आप उजागर किए गए jQuery.Deferred का उपयोग करके अपने स्वयं के आस्थगित ऑब्जेक्ट बना सकते हैं। इस एपीआई के बारे में अधिक जानकारी डिफर्ड ऑब्जेक्ट प्रलेखन में पाई जा सकती है ।
एरिक Hynds ने jQuery 1.5 में Deferreds का उपयोग करने पर एक अच्छा ट्यूटोरियल लिखा है ।
बल्कि फिर आपको बता रहा है कि यह क्या करता है, मैं आपको दिखाता हूं कि यह क्या करता है और इसे समझाता है।
JQuery 1.5 के संबंधित स्रोत की एक प्रति जो यह बता रही है कि व्याख्या करने के साथ। मुझे लगता है कि टिप्पणियाँ ज्यादातर सही हैं।
इससे फायदा हो सकता है
// promiseMethods. These are the methods you get when you ask for a promise.
// A promise is a "read-only" version
// fullMethods = "then done fail resolve resolveWith reject rejectWith isResolve isRejected promise cancel".split(" ")
// As you can see it removes resolve/reject so you can't actaully trigger a
// anything on the deferred object, only process callbacks when it "finishes".
promiseMethods = "then done fail isResolved isRejected promise".split(" "),
// Create a simple deferred (one callbacks list)
/* Class: _Deferred.
* methods: done, resolve, resolveWith, isResolved
* internal method: cancel
*
* Basically allows you to attach callbacks with the done method.
* Then resolve the deferred action whenever you want with an argument.
* All the callbacks added with done will be called with the resolved argument
* Any callbacks attached after resolvement will fire immediatly.
*
* resolveWith allows you to set the this scope in the callbacks fired.
*
* isResolved just checks whether it's resolved yet.
*
* cancel blocks resolve/resolveWith from firing. the methods added throug
* done will never be called
*/
_Deferred: function () {
var // callbacks list
callbacks = [],
// stored [ context , args ]
// stores the context & args that .resolve was called with
fired,
// to avoid firing when already doing so
firing,
// flag to know if the deferred has been cancelled
// in Deferred cancel gets called after the first resolve call
cancelled,
// the deferred itself
deferred = {
// done( f1, f2, ...)
done: function () {
if (!cancelled) {
var args = arguments,
i, length,
// elem in callback list
elem,
// type of elem in callback list
type,
// cached context & args for when done is called
// after resolve has been
_fired;
// If resolve has been called already
if (fired) {
// mark it locally
_fired = fired;
// set fired to 0. This is neccesary to handle
// how done deals with arrays recursively
// only the original .done call handles fired
// any that unwrap arrays and call recursively
// dont handle the fired.
fired = 0;
}
// for each function append it to the callback list
for (i = 0, length = args.length; i < length; i++) {
elem = args[i];
type = jQuery.type(elem);
// if argument is an array then call done recursively
// effectively unwraps the array
if (type === "array") {
// def.done([f1, f2, f3]) goes to
// def.done(f1, f2, f3) through the apply
deferred.done.apply(deferred, elem);
} else if (type === "function") {
// if its a function add it to the callbacks
callbacks.push(elem);
}
}
// if it's already been resolved then call resolveWith using
// the cahced context and arguments to call the callbacks
// immediatly
if (_fired) {
deferred.resolveWith(_fired[0], _fired[1]);
}
}
return this;
},
// resolve with given context and args
resolveWith: function (context, args) {
// if its been cancelled then we can't resolve
// if it has fired then we can't fire again
// if it's currently firing then we can't fire. This check is
// there because of the try finally block. It ensures we
// cant call resolve between the try & finally in the catch phase.
if (!cancelled && !fired && !firing) {
firing = 1;
// try block because your calling external callbacks
// made by the user which are not bugfree.
// the finally block will always run no matter how bad
// the internal code is.
try {
while (callbacks[0]) {
callbacks.shift().apply(context, args);
}
// cache the content and arguments taht have been called
// and set firing to false.
} finally {
fired = [context, args];
firing = 0;
}
}
return this;
},
// resolve with this as context and given arguments
// just maps to resolveWith, this sets the this scope as normal
// maps to this.promise which is the read only version of Deferred.
resolve: function () {
deferred.resolveWith(jQuery.isFunction(this.promise) ? this.promise() :
this, arguments);
return this;
},
// Has this deferred been resolved?
// checks whether it's firing or if it has fired.
isResolved: function () {
return !!(firing || fired);
},
// Cancels the action. To be used internally
cancel: function () {
cancelled = 1;
callbacks = [];
return this;
}
};
return deferred;
},
/* Class: Deferred.
* methods: then, done, fail, resolve, reject, resolveWith, rejectWith, isResolved,
isRejected, promise
*
* then is a shortcut for both assigning done & fail in one function.
*
* This one has two underlying lists with different semantic meanings. You
* can bind to both the done callbacks and the fail callbacks then either
* resolve or reject your Deferred object.
*
* You can check whether it has been resolved or rejected. useful to see
* Afterwards which one has happened.
*
* Call .promise to return a new object which doesn't have the resolve/reject
* methods on it. This means you can only bind to it and not resolve/reject it.
* This is effectively read-only.
*
*/
// Full fledged deferred (two callbacks list)
Deferred: function (func) {
// the main deferred which deals with the success callbacks
var deferred = jQuery._Deferred(),
// the failure deferred which deals with the rejected callbacks
failDeferred = jQuery._Deferred(),
// the read only promise is cached.
promise;
// Add errorDeferred methods, then and promise
jQuery.extend(deferred, {
// def.then([f1, f2, ...], [g1, g2, ...] is a short hand for
// def.done([f1, f2, ...])
// def.fail([g1, g2, ...])
then: function (doneCallbacks, failCallbacks) {
// fail exists here because this code will only run after
// deferred has been extended.
deferred.done(doneCallbacks).fail(failCallbacks);
return this;
},
// map def.fail to the second underlying deferred callback list
// map all the other methods for rejection/failure to the underlying
// failDeffered object so that Deferred has two callback lists stored
// internally.
fail: failDeferred.done,
rejectWith: failDeferred.resolveWith,
reject: failDeferred.resolve,
isRejected: failDeferred.isResolved,
// Get a promise for this deferred
// If obj is provided, the promise aspect is added to the object
// no clue what to do with "i"
promise: function (obj, i /* internal */ ) {
// if no argument is passed then just extend promise
if (obj == null) {
// if cached return the cache.
if (promise) {
return promise;
}
// set promise & arg to be {}
promise = obj = {};
}
// for each promiseMethods in the read only promise list
i = promiseMethods.length;
while (i--) {
// set the deferred method on the object
obj[promiseMethods[i]] = deferred[promiseMethods[i]];
}
// returns the "read-only" deferred without
// resolve, resolveWith, reject & rejectWith.
// So you cant "resolve" it but only add "done" functions
return obj;
}
});
// Make sure only one callback list will be used
// if either resolve or reject is called cancel both.
// this means that the one that has been called cant be called again
// and the other one will never be called. So only the done or the fail
// methods will ever be called
deferred.then(failDeferred.cancel, deferred.cancel);
// Don't mess with cancel!
// Unexpose cancel
delete deferred.cancel;
// Call given func if any
// function argument to be called. This was passed in. Allows you to
// handle the deferred object after creating a new one, both as this scope
// and as a new argument.
if (func) {
func.call(deferred, deferred);
}
return deferred;
},
/* Method: when
* Arguments: none OR 1 of type(any & !deferred) OR n of type(deferred).
*
* If no arguments are passed then it gets resolved immediatly. A good way to
* call multiple callback functions? Don't really know a good use of $.when()
*
* If one argument is passed and its not a deferred object then it resolves
* immediatly and passes that argument to all the done callbacks attached.
*
* if n arguments are passed of type deferred object then the the done callbacks
* will only fire if all of them succeed. If a single one fails then the
* fail callbacks fire.
*
* Returns a promise read-only deferred object
*/
// Deferred helper
when: function (object) {
var args = arguments,
length = args.length,
// If you pass in a deferred object then set deferred to be the promise
// if you pass in anything else then set deferred to be a new deferred
deferred = length <= 1 && object && jQuery.isFunction(object.promise) ?
object :
jQuery.Deferred(),
// cache the promise
promise = deferred.promise(),
// store an array
resolveArray;
// if multiple objects are passed in
if (length > 1) {
// create an arrey to store of values.
resolveArray = new Array(length);
// for each object that we wait on
jQuery.each(args, function (index, element) {
// when that object resolves then
jQuery.when(element).then(function (value) {
// store value in the array or store an array of values in it
resolveArray[index] = arguments.length > 1 ? slice.call(arguments, 0) :
value;
// if length === 1 then we finished calling them all
if (!--length) {
// resolve the deferred object with the read only promise
// as context and the resolved values array as the argument
deferred.resolveWith(promise, resolveArray);
}
// if any fail then we reject or deferred
}, deferred.reject);
});
// if deferred was newly created but there was only one argument then
// resolve it immediatly with the argument.
} else if (deferred !== object) {
deferred.resolve(object);
}
// return the read-only deferred.
return promise;
},Problem solved। Btw कि 1.5beta स्रोत मुझे लगता है कि 1.6 में कुछ बदलाव हैं
जावास्क्रिप्ट में काम करते समय, हम ऐसी स्थिति का सामना करते हैं जहां फ़ंक्शन कॉल अतुल्यकालिक हैं। यह calee फ़ंक्शन का है (X का कहना है) प्रवाह को एसिंक्रोनस फ़ंक्शन के लिए प्रतीक्षा नहीं करता है (Let say Y)। विशिष्ट उदाहरण तब होता है जब हम किसी डेटाबेस या HTML पृष्ठ से कुछ डेटा लाने के लिए सर्वर पर कॉल करते हैं। यदि वे कॉल अतुल्यकालिक नहीं थे, तो उपयोगकर्ता इंटरफ़ेस सर्वर के जवाब के लिए इंतजार कर रहा होगा। यह अतुल्यकालिक प्रकृति एक समस्या की ओर ले जाती है जब आप चीजों को एक क्रम में निष्पादित करना चाहते हैं, उदाहरण के लिए, आप वाई (एसिंक्र) को डेटा निष्पादित या किए जाने के बाद कुछ प्रिंट करना चाहते हैं। यहाँ jQuery हमें Deffered ऑब्जेक्ट प्रदान करता है। असल में, jQuery ने सभी बॉयलरप्लेट कोड का ध्यान रखा है जो आमतौर पर हम इस स्थिति को हल करने के लिए लिखते हैं। ये रहा एक सरल उदाहरण:
$.ajax({
...
}).done(function(){
//write here what you wish to do when this ajax call is success
}).fail(function(){
//write here what you wish to do on failure of this ajax call
}); //see more on jQuery Deferred pageआप अपने स्वयं के आस्थगित (asynch) फ़ंक्शन लिख सकते हैं
function DoSomethingTimeConsumingAsynch(){
var deferred = $.Deferred();
_.defer(function(){ //I am using underscore, you can also use setTimeout
...
deferred.resolve();//When the process is done successfully
...
deferred.reject(); //When the process has failed
});
return deferred;
}
//HEre how to use your own asynch function
DoSomethingTimeConsumingAsynch()
.done(function(){
//this will be invoked on success
})
.fail(function(){
//this will be invoked on failure
})मुझे उम्मीद है कि इससे मदद मिली।