कुछ विधियों का उपयोग करते हुए, जब आप किसी तालिका की एक प्रतिलिपि बनाते हैं जिसे आप अनुक्रमित, पीके, एफके आदि खो देते हैं, उदाहरण के लिए SQL सर्वर में मैं कह सकता हूं:
select * into dbo.table2 from dbo.table1;यह तालिका की एक साधारण प्रति है; सभी सूचकांक / बाधाएँ गायब हैं। मैं एक तालिका संरचना (बैकअप का उपयोग किए बिना) की नकल कैसे कर सकता हूं?
मैं मुख्य रूप से मैन्युअल रूप से ऐसा करना चाह रहा हूं, लेकिन अगर यह संभव नहीं है तो मैं किसी भी समाधान को स्वीकार करूंगा।
जवाबों:
आप निश्चित रूप से यूआई का उपयोग करके एक तालिका को अपेक्षाकृत आसान कर सकते हैं:
यह एक CREATE TABLEस्क्रिप्ट को आउटपुट करेगा और आपको केवल पुराने नाम को नए नाम से खोजना और बदलना होगा (और सत्यापित करें कि नए नाम के साथ कोई ऑब्जेक्ट पहले से मौजूद नहीं है)।
लेकिन अगर आप इसे स्वचालित करने की कोशिश कर रहे हैं (जैसे कोड में तालिका तालिका बनाएं), यह थोड़ा अधिक बोझिल है। उपरोक्त स्क्रिप्टिंग विकल्प सिर्फ CREATE TABLEमेटाडेटा में एक ही स्थान से पूरे डीडीएल को नहीं खींचता है ; यह पूरी तरह से जादू की एक पूरी गुच्छा को कोड में पर्दे के पीछे करता है ताकि अंततः CREATE TABLEलिपि तैयार की जा सके (आप प्रोइलर का उपयोग करके देख सकते हैं कि उसे इसका डेटा कहाँ मिलता है, लेकिन आप यह नहीं देख सकते हैं कि यह कैसे असेंबल करता है)। मैंने इसके लिए एक विकल्प सुझाया:
http://connect.microsoft.com/SQLServer/feedback/details/273934
हालाँकि यह बहुत कम वोटों के साथ मिला था और माइक्रोसॉफ्ट द्वारा जल्दी से शूट किया गया था। स्कीमा उत्पन्न करने के लिए आपको तृतीय पक्ष टूल का उपयोग करने के लिए यह अधिक सार्थक लग सकता है ( मैंने इस बारे में ब्लॉग किया है )।
SQL सर्वर 2012 में नए मेटाडेटा फ़ंक्शंस हैं जो आपको 2005, 2008 और 2008 R2 में आपके द्वारा किए गए कार्य की तुलना में बहुत करीब आने की अनुमति देते हैं, मेटाडेटा से स्तंभ जानकारी (जिसमें बहुत सारे कैवेट हैं, उदाहरण के लिए) दशमलव आपको सटीक / पैमाना जोड़ना होगा, अगर [n [var [char]] आपको लंबाई विनिर्देशन जोड़ना है, यदि n [var] char को आपको max_length को आधे में काटना है, यदि यह एक MAX है -1 से अधिकतम बदलें, आदि)। SQL सर्वर 2012 में यह हिस्सा थोड़ा आसान है:
SELECT name, system_type_name, is_nullable FROM
sys.dm_exec_describe_first_result_set('select * from sys.objects', NULL, 0)परिणाम:
name system_type_name is_nullable
-------------------- ---------------- -----------
name nvarchar(128) 0
object_id int 0
principal_id int 1
schema_id int 0
parent_object_id int 0
type char(2) 0
type_desc nvarchar(60) 1
create_date datetime 0
modify_date datetime 0
is_ms_shipped bit 0
is_published bit 0
is_schema_published bit 0मैंने इस बारे में भी ब्लॉग किया है।
यकीनन यह एक लक्षित CREATE TABLEदृष्टिकोण की तुलना में आपके लक्षित कथन के बहुत करीब है sys.columns, लेकिन अभी भी बहुत काम करना बाकी है। कुंजी, बाधाएं, पंक्ति विकल्पों में पाठ, फ़ाइल समूह जानकारी, संपीड़न सेटिंग्स, अनुक्रमित, आदि। यह एक बहुत लंबी सूची है और मैं एक बार फिर आपको सुझाव दूंगा कि आप इसके बजाय एक 3 पार्टी उपकरण को देखें, एक बार में दोहराए जाने के जोखिम पर। -उपयोगी सादृश्य, पहिया का फिर से आविष्कार।
उस सभी ने कहा, यदि आपको कोड के माध्यम से ऐसा करने की आवश्यकता है, लेकिन आप इसे SQL सर्वर के बाहर कर सकते हैं, तो आप SMO / PowerShell पर विचार कर सकते हैं। देखें इस टिप और Scripter.Script () विधि ।
मैं इस सपा को सभी चीजों के साथ स्वचालित रूप से स्कीमा बनाने के लिए लिखा था, pk, fk, विभाजन, अड़चन ...
जरूरी!! निष्पादन से पहले
create type TestTableType as table (ObjectID int)यहाँ सपा:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
--*************************************************************************************************'
-- La procedura crea lo script di una tabella
-- Tabella : xxxxx
-- Creata da : E.Mantovanelli
-- Data creazione : 28-06-2012
-- Data modifica: 28-06-2012
--*************************************************************************************************'
/*
-- ID----|-----Data-----|-- User --------- | ---- Note
20-11-2013 E.Mantovanelli distinzione schema delle tabelle
estrazione da db selezionato
aggiunta estrazione partizione
*/
CREATE PROCEDURE [dbo].[util_ScriptTable]
@DBName SYSNAME
,@schema sysname
,@TableName SYSNAME
,@IncludeConstraints BIT = 1
,@IncludeIndexes BIT = 1
,@NewTableSchema sysname
,@NewTableName SYSNAME = NULL
,@UseSystemDataTypes BIT = 0
,@script varchar(max) output
AS
BEGIN try
if not exists (select * from sys.types where name = 'TestTableType')
create type TestTableType as table (ObjectID int)--drop type TestTableType
declare @sql nvarchar(max)
DECLARE @MainDefinition TABLE (FieldValue VARCHAR(200))
--DECLARE @DBName SYSNAME
DECLARE @ClusteredPK BIT
DECLARE @TableSchema NVARCHAR(255)
--SET @DBName = DB_NAME(DB_ID())
SELECT @TableName = name FROM sysobjects WHERE id = OBJECT_ID(@TableName)
DECLARE @ShowFields TABLE (FieldID INT IDENTITY(1,1)
,DatabaseName VARCHAR(100)
,TableOwner VARCHAR(100)
,TableName VARCHAR(100)
,FieldName VARCHAR(100)
,ColumnPosition INT
,ColumnDefaultValue VARCHAR(100)
,ColumnDefaultName VARCHAR(100)
,IsNullable BIT
,DataType VARCHAR(100)
,MaxLength varchar(10)
,NumericPrecision INT
,NumericScale INT
,DomainName VARCHAR(100)
,FieldListingName VARCHAR(110)
,FieldDefinition CHAR(1)
,IdentityColumn BIT
,IdentitySeed INT
,IdentityIncrement INT
,IsCharColumn BIT
,IsComputed varchar(255))
DECLARE @HoldingArea TABLE(FldID SMALLINT IDENTITY(1,1)
,Flds VARCHAR(4000)
,FldValue CHAR(1) DEFAULT(0))
DECLARE @PKObjectID TABLE(ObjectID INT)
DECLARE @Uniques TABLE(ObjectID INT)
DECLARE @HoldingAreaValues TABLE(FldID SMALLINT IDENTITY(1,1)
,Flds VARCHAR(4000)
,FldValue CHAR(1) DEFAULT(0))
DECLARE @Definition TABLE(DefinitionID SMALLINT IDENTITY(1,1)
,FieldValue VARCHAR(200))
set @sql=
'
use '+@DBName+'
SELECT distinct DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,''[''+COLUMN_NAME+'']'' as COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = ''YES'' THEN 1 ELSE 0 END
,DATA_TYPE
,case CHARACTER_MAXIMUM_LENGTH when -1 then ''max'' else CAST(CHARACTER_MAXIMUM_LENGTH AS varchar) end--CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + '',''
,'''' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
,cc.definition
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = ''D''
left join sys.computed_columns cc on c.TABLE_NAME=OBJECT_NAME(cc.object_id) and sc.column_id=cc.column_id
WHERE c.TABLE_NAME = @TableName and c.TABLE_SCHEMA=@schema
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
'
print @sql
INSERT INTO @ShowFields( DatabaseName
,TableOwner
,TableName
,FieldName
,ColumnPosition
,ColumnDefaultValue
,ColumnDefaultName
,IsNullable
,DataType
,MaxLength
,NumericPrecision
,NumericScale
,DomainName
,FieldListingName
,FieldDefinition
,IdentityColumn
,IdentitySeed
,IdentityIncrement
,IsCharColumn
,IsComputed)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT @DBName--DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = 'YES' THEN 1 ELSE 0 END
,DATA_TYPE
,CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + ','
,'' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = 'D'
WHERE c.TABLE_NAME = @TableName
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
*/
SELECT TOP 1 @TableSchema = TableOwner FROM @ShowFields
INSERT INTO @HoldingArea (Flds) VALUES('(')
INSERT INTO @Definition(FieldValue)VALUES('CREATE TABLE ' + CASE WHEN @NewTableName IS NOT NULL THEN @DBName + '.' + @NewTableSchema + '.' + @NewTableName ELSE @DBName + '.' + @TableSchema + '.' + @TableName END)
INSERT INTO @Definition(FieldValue)VALUES('(')
INSERT INTO @Definition(FieldValue)
SELECT CHAR(10) + FieldName + ' ' +
--CASE WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN DomainName + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END ELSE UPPER(DataType) +CASE WHEN IsCharColumn = 1 THEN '(' + CAST(MaxLength AS VARCHAR(10)) + ')' ELSE '' END +CASE WHEN IdentityColumn = 1 THEN ' IDENTITY(' + CAST(IdentitySeed AS VARCHAR(5))+ ',' + CAST(IdentityIncrement AS VARCHAR(5)) + ')' ELSE '' END +CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END +CASE WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN 'CONSTRAINT [' + ColumnDefaultName + '] DEFAULT' + UPPER(ColumnDefaultValue) ELSE '' END END + CASE WHEN FieldID = (SELECT MAX(FieldID) FROM @ShowFields) THEN '' ELSE ',' END
CASE WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN DomainName +
CASe WHEN IsNullable = 1 THEN ' NULL '
ELSE ' NOT NULL '
END
ELSE
case when IsComputed is null then
UPPER(DataType) +
CASE WHEN IsCharColumn = 1 THEN '(' + CAST(MaxLength AS VARCHAR(10)) + ')'
ELSE
CASE WHEN DataType = 'numeric' THEN '(' + CAST(NumericPrecision AS VARCHAR(10))+','+ CAST(NumericScale AS VARCHAR(10)) + ')'
ELSE
CASE WHEN DataType = 'decimal' THEN '(' + CAST(NumericPrecision AS VARCHAR(10))+','+ CAST(NumericScale AS VARCHAR(10)) + ')'
ELSE ''
end
end
END +
CASE WHEN IdentityColumn = 1 THEN ' IDENTITY(' + CAST(IdentitySeed AS VARCHAR(5))+ ',' + CAST(IdentityIncrement AS VARCHAR(5)) + ')'
ELSE ''
END +
CASE WHEN IsNullable = 1 THEN ' NULL '
ELSE ' NOT NULL '
END +
CASE WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN 'CONSTRAINT [' + replace(ColumnDefaultName,@TableName,@NewTableName) + '] DEFAULT' + UPPER(ColumnDefaultValue)
ELSE ''
END
else
' as '+IsComputed+' '
end
END +
CASE WHEN FieldID = (SELECT MAX(FieldID) FROM @ShowFields) THEN ''
ELSE ','
END
FROM @ShowFields
IF @IncludeConstraints = 1
BEGIN
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT ['' + replace(name,@TableName,@NewTableName) + ''] FOREIGN KEY ('' + ParentColumns + '') REFERENCES ['' + ReferencedObject + '']('' + ReferencedColumns + '')''
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk
inner join sys.schemas s on fk.schema_id=s.schema_id and s.name=@schema) a
WHERE ParentObject = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema
/*
SELECT ',CONSTRAINT [' + name + '] FOREIGN KEY (' + ParentColumns + ') REFERENCES [' + ReferencedObject + '](' + ReferencedColumns + ')'
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + ','
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + ','
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk ) a
WHERE ParentObject = @TableName
*/
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT ['' + replace(c.name,@TableName,@NewTableName) + ''] CHECK '' + definition
FROM sys.check_constraints c join sys.schemas s on c.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema
/*
SELECT ',CONSTRAINT [' + name + '] CHECK ' + definition FROM sys.check_constraints
WHERE OBJECT_NAME(parent_object_id) = @TableName
*/
set @sql=
'
use '+@DBName+'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
'
print @sql
INSERT INTO @PKObjectID(ObjectID)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
*/
set @sql=
'
use '+@DBName+'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
'
print @sql
INSERT INTO @Uniques(ObjectID)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
*/
SET @ClusteredPK = CASE WHEN @@ROWCOUNT > 0 THEN 1 ELSE 0 END
declare @t TestTableType
insert @t select * from @PKObjectID
declare @u TestTableType
insert @u select * from @Uniques
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT '' + replace(cco.name,@TableName,@NewTableName) + CASE type WHEN ''PK'' THEN '' PRIMARY KEY '' + CASE WHEN pk.ObjectID IS NULL THEN '' NONCLUSTERED '' ELSE '' CLUSTERED '' END WHEN ''UQ'' THEN '' UNIQUE '' END + CASE WHEN u.ObjectID IS NOT NULL THEN '' NONCLUSTERED '' ELSE '''' END
+ ''(''+REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id
order by key_ordinal FOR XML PATH(''''))), 2, 8000)) + '')''
FROM sys.key_constraints cco
inner join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
LEFT JOIN @U u ON cco.object_id = u.objectID
LEFT JOIN @t pk ON cco.object_id = pk.ObjectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50),@t TestTableType readonly,@u TestTableType readonly',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema,@t=@t,@u=@u
/*
SELECT ',CONSTRAINT ' + name + CASE type WHEN 'PK' THEN ' PRIMARY KEY ' + CASE WHEN pk.ObjectID IS NULL THEN ' NONCLUSTERED ' ELSE ' CLUSTERED ' END WHEN 'UQ' THEN ' UNIQUE ' END + CASE WHEN u.ObjectID IS NOT NULL THEN ' NONCLUSTERED ' ELSE '' END
+ '(' +REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN ' DESC' ELSE ' ASC' END + ','
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id FOR XML PATH(''))), 2, 8000)) + ')'
FROM sys.key_constraints cco
LEFT JOIN @PKObjectID pk ON cco.object_id = pk.ObjectID
LEFT JOIN @Uniques u ON cco.object_id = u.objectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
*/
END
INSERT INTO @Definition(FieldValue) VALUES(')')
set @sql=
'
use '+@DBName+'
select '' on '' + d.name + ''([''+c.name+''])''
from sys.tables t join sys.indexes i on(i.object_id = t.object_id and i.index_id < 2)
join sys.index_columns ic on(ic.partition_ordinal > 0 and ic.index_id = i.index_id and ic.object_id = t.object_id)
join sys.columns c on(c.object_id = ic.object_id and c.column_id = ic.column_id)
join sys.schemas s on t.schema_id=s.schema_id
join sys.data_spaces d on i.data_space_id=d.data_space_id
where t.name=@TableName and s.name=@schema
order by key_ordinal
'
print 'x'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
IF @IncludeIndexes = 1
BEGIN
set @sql=
'
use '+@DBName+'
SELECT distinct '' CREATE '' + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '+@DBName+'.'+@NewTableSchema+'.'+@NewTableName+' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema,@ClusteredPK=@ClusteredPK
END
/*
SELECT 'CREATE ' + type_desc + ' INDEX [' + [name] COLLATE SQL_Latin1_General_CP1_CI_AS + '] ON [' + OBJECT_NAME(object_id) + '] (' + REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN ' DESC' ELSE ' ASC' END + ','
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE OBJECT_NAME(sc.object_id) = @TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
ORDER BY index_column_id ASC FOR XML PATH('') )), 2, 8000)) + ')'
FROM sys.indexes i
WHERE OBJECT_NAME(object_id) = @TableName
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
*/
INSERT INTO @MainDefinition(FieldValue)
SELECT FieldValue FROM @Definition
ORDER BY DefinitionID ASC
----------------------------------
declare @q varchar(max)
set @q=(select replace((SELECT FieldValue FROM @MainDefinition FOR XML PATH('')),'</FieldValue>',''))
set @script=(select REPLACE(@q,'<FieldValue>',''))
--drop type TestTableType
END try
-- ##############################################################################################################################################################################
BEGIN CATCH
BEGIN
-- INIZIO Procedura in errore =========================================================================================================================================================
PRINT '***********************************************************************************************************************************************************'
PRINT 'ErrorNumber : ' + CAST(ERROR_NUMBER() AS NVARCHAR(MAX))
PRINT 'ErrorSeverity : ' + CAST(ERROR_SEVERITY() AS NVARCHAR(MAX))
PRINT 'ErrorState : ' + CAST(ERROR_STATE() AS NVARCHAR(MAX))
PRINT 'ErrorLine : ' + CAST(ERROR_LINE() AS NVARCHAR(MAX))
PRINT 'ErrorMessage : ' + CAST(ERROR_MESSAGE() AS NVARCHAR(MAX))
PRINT '***********************************************************************************************************************************************************'
-- FINE Procedura in errore =========================================================================================================================================================
END
set @script=''
return -1
END CATCH
-- ############################################################################################################################################################################## इसे निष्पादित करने के लिए:
declare @s varchar(max)
exec [util_ScriptTable] 'db','schema_source','table_source',1,1,'schema_dest','tab_dest',0,@s output
select @sयह एक दीवार में कील लगाने के लिए एक जैकहैमर का उपयोग हो सकता है, लेकिन इस प्रश्न की व्यापकता को देखते हुए मुझे लगता है कि यह उल्लेख करने के लिए एक वैध विकल्प है।
यदि आप SQL Server 2012 SP4 +, 2014 SP2 + या 2016 SP1 + का उपयोग कर रहे हैं, तो आप DBCC CLONEDATABASEअपने डेटाबेस sans डेटा की स्कीमा-केवल प्रतिलिपि बनाने के लिए लाभ उठा सकते हैं । यह कई तालिकाओं की व्यापक स्कीमा प्रतियां बनाने के लिए आदर्श है और तालिकाओं की एक श्रृंखला के माध्यम से लूपिंग की प्रक्रिया को "स्वचालित" करने की आवश्यकता को समाप्त कर सकता है, लेकिन चेतावनी दी जाती है कि सभी तालिका प्रतियां एक नए रीड-ओनली डेटाबेस के अंदर बनाई जाएंगी ।
इन तालिकाओं में विदेशी कुंजी, प्राथमिक कुंजी, अनुक्रमित और बाधाएं शामिल होंगी । वे आंकड़े और क्वेरी स्टोर डेटा भी शामिल करेंगे (जब तक कि आप निर्दिष्ट न करें NO_STATISTICSऔर NO_QUERYSTORE)।
वाक्य-विन्यास है
DBCC CLONEDATABASE (source_database_name, target_database_name)[WITH [NO_STATISTICS][,NO_QUERYSTORE]] वहाँ भी कुछ अन्य लोगों के बारे में पता किया जा रहा है, जिस पर ब्रेंट ओज़र का एक बड़ा पद है, लेकिन यह सब वास्तव में कैसे और क्यों आप तालिकाओं की प्रतियों को बनाना चाहते हैं, चाहे वे किसी भी सूक्ष्मता से डील ब्रेकर हों या नहीं ।
SQL Server Management Studio में "Generate script" कमांड का उपयोग आप एक स्क्रिप्ट प्राप्त करने के लिए कर सकते हैं जो आपकी तालिका बना सकती है, जिसमें इंडेक्स, ट्रिगर्स, विदेशी कुंजियाँ आदि शामिल हैं।
SSMS में
फिर आप अपने गंतव्य डेटाबेस में केवल वही शामिल कर सकते हैं जिसकी आपको आवश्यकता है।
इस धागे में E.Mantovanelli के आधार पर एक संस्करण है। यह एक समस्या को ठीक करता है जहां एक अद्वितीय सूचकांक में परिणामी स्क्रिप्ट में कुंजी शब्द UNIQUE शामिल नहीं था। यह पैरामीटर भी जोड़ता है, इसलिए एक तालिका गैर-क्लस्टर किए गए अनुक्रमित के बिना बनाई जा सकती है या आप केवल गैर-संकुल सूचकांक को स्क्रिप्ट कर सकते हैं। मैं इसका उपयोग एक मंच तालिका बनाने के लिए करता हूं, इसे गैर-संकुल अनुक्रमणिका को जोड़ने के लिए लोड करता हूं फिर एक तालिका स्विच करता हूं, जो लोड को तेजी से चलाने की अनुमति देता है और सूचकांक खंडित नहीं होते हैं।
SET ANSI_NULLS ON;
GO
SET QUOTED_IDENTIFIER ON;
GO
--*************************************************************************************************'
-- La procedura crea lo script di una tabella
-- Tabella : xxxxx
-- Creata da : E.Mantovanelli
-- Data creazione : 28-06-2012
-- Data modifica: 28-06-2012
--*************************************************************************************************'
/*
-- ID----|-----Data-----|-- User --------- | ---- Note
20-11-2013 E.Mantovanelli distinzione schema delle tabelle
estrazione da db selezionato
aggiunta estrazione partizione
*/
--*************************************************************************************************'
-- Creates a copy of a table with optionally all indexes and constraints depending on parameters
-- Updated by : Brent Willis
-- Date Updated : 09-11-2019
-- Changes: Added the ability to create a table with clustered index and constraints only or to
-- CREATE just the non-clustered indexes. This is helpful so a table can be created,
-- loaded then non-clusted indexes added so it can them be swapped into a partitioned
-- table with freshly created indexes to lower fragmentation.
--
-- Also fixed an issue when a unique index was defined the index resulting table was not unique.
--*************************************************************************************************'
ALTER PROCEDURE dbo.util_ScriptTable
@DBName sysname
, @schema sysname
, @TableName sysname
, @includeTable Bit = 1
, @IncludeConstraints Bit = 1
, @IncludeClusteredIndex Bit = 1
, @IncludeIndexes Bit = 1
, @NewTableSchema sysname
, @NewTableName sysname = NULL
, @UseSystemDataTypes Bit = 0
, @script Varchar(MAX) OUTPUT
AS
BEGIN TRY
IF NOT EXISTS (SELECT * FROM sys.types WHERE name = 'TestTableType')
CREATE TYPE TestTableType AS TABLE (ObjectID Int); --drop type TestTableType
DECLARE @sql NVarchar(MAX);
DECLARE @MainDefinition Table (FieldValue Varchar(200));
--DECLARE @DBName SYSNAME
DECLARE @ClusteredPK Bit;
DECLARE @TableSchema NVarchar(255);
--SET @DBName = DB_NAME(DB_ID())
SELECT @TableName = name FROM sys.sysobjects WHERE id = Object_Id(@TableName);
DECLARE @ShowFields Table (FieldID Int IDENTITY(1, 1)
, DatabaseName Varchar(100)
, TableOwner Varchar(100)
, TableName Varchar(100)
, FieldName Varchar(100)
, ColumnPosition Int
, ColumnDefaultValue Varchar(100)
, ColumnDefaultName Varchar(100)
, IsNullable Bit
, DataType Varchar(100)
, MaxLength Varchar(10)
, NumericPrecision Int
, NumericScale Int
, DomainName Varchar(100)
, FieldListingName Varchar(110)
, FieldDefinition Char(1)
, IdentityColumn Bit
, IdentitySeed Int
, IdentityIncrement Int
, IsCharColumn Bit
, IsComputed Varchar(255));
DECLARE @HoldingArea Table (FldID SmallInt IDENTITY(1, 1), Flds Varchar(4000), FldValue Char(1) DEFAULT (0));
DECLARE @PKObjectID Table (ObjectID Int);
DECLARE @Uniques Table (ObjectID Int);
DECLARE @Definition Table (DefinitionID SmallInt IDENTITY(1, 1), FieldValue Varchar(2000));
SET @sql = N'
use ' + @DBName + N'
SELECT distinct DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,''[''+COLUMN_NAME+'']'' as COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = ''YES'' THEN 1 ELSE 0 END
,DATA_TYPE
,case CHARACTER_MAXIMUM_LENGTH when -1 then ''max'' else CAST(CHARACTER_MAXIMUM_LENGTH AS varchar) end--CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + '',''
,'''' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
,cc.definition
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = ''D''
left join sys.computed_columns cc on c.TABLE_NAME=OBJECT_NAME(cc.object_id) and sc.column_id=cc.column_id
WHERE c.TABLE_NAME = @TableName and c.TABLE_SCHEMA=@schema
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
' ;
--PRINT @sql;
INSERT INTO @ShowFields (DatabaseName
, TableOwner
, TableName
, FieldName
, ColumnPosition
, ColumnDefaultValue
, ColumnDefaultName
, IsNullable
, DataType
, MaxLength
, NumericPrecision
, NumericScale
, DomainName
, FieldListingName
, FieldDefinition
, IdentityColumn
, IdentitySeed
, IdentityIncrement
, IsCharColumn
, IsComputed)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SELECT TOP 1 @TableSchema = TableOwner FROM @ShowFields;
INSERT INTO @HoldingArea (Flds) VALUES ('(');
IF @includeTable = 1
BEGIN
INSERT INTO @Definition (FieldValue)
VALUES
( 'CREATE TABLE ' + CASE
WHEN @NewTableName IS NOT NULL THEN
@DBName + '.' + @NewTableSchema + '.' + @NewTableName
ELSE
@DBName + '.' + @TableSchema + '.' + @TableName
END);
INSERT INTO @Definition (FieldValue) VALUES ('(');
INSERT INTO @Definition (FieldValue)
SELECT Char(10) + FieldName + ' '
+ CASE
WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN
DomainName + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END
ELSE
CASE
WHEN IsComputed IS NULL THEN
Upper(DataType)
+ CASE
WHEN IsCharColumn = 1 THEN
'(' + Cast(MaxLength AS Varchar(10)) + ')'
ELSE
CASE
WHEN DataType = 'numeric' THEN
'(' + Cast(NumericPrecision AS Varchar(10)) + ','
+ Cast(NumericScale AS Varchar(10)) + ')'
ELSE
CASE
WHEN DataType = 'decimal' THEN
'(' + Cast(NumericPrecision AS Varchar(10)) + ','
+ Cast(NumericScale AS Varchar(10)) + ')'
ELSE
''
END
END
END
+ CASE
WHEN IdentityColumn = 1 THEN
' IDENTITY(' + Cast(IdentitySeed AS Varchar(5)) + ','
+ Cast(IdentityIncrement AS Varchar(5)) + ')'
ELSE
''
END + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END
+ CASE
WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN
'CONSTRAINT ['
+ Replace(ColumnDefaultName, @TableName, @NewTableName)
+ '] DEFAULT' + Upper(ColumnDefaultValue)
ELSE
''
END
ELSE
' as ' + IsComputed + ' '
END
END + CASE
WHEN FieldID = (SELECT Max(FieldID)FROM @ShowFields) THEN
''
ELSE
','
END
FROM @ShowFields;
--------------------------------------------------
IF @IncludeConstraints = 1
BEGIN
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT ['' + replace(name,@TableName,@NewTableName) + ''] FOREIGN KEY ('' + ParentColumns + '') REFERENCES ['' + ReferencedObject + '']('' + ReferencedColumns + '')''
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk
inner join sys.schemas s on fk.schema_id=s.schema_id and s.name=@schema) a
WHERE ParentObject = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT ['' + replace(c.name,@TableName,@NewTableName) + ''] CHECK '' + definition
FROM sys.check_constraints c join sys.schemas s on c.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
' ;
--PRINT @sql;
INSERT INTO @PKObjectID (ObjectID)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
' ;
--PRINT @sql;
INSERT INTO @Uniques (ObjectID)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SET @ClusteredPK = CASE WHEN @@ROWCOUNT > 0 THEN 1 ELSE 0 END;
DECLARE @t TestTableType;
INSERT @t SELECT * FROM @PKObjectID;
DECLARE @u TestTableType;
INSERT @u SELECT * FROM @Uniques;
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT '' + replace(cco.name,@TableName,@NewTableName) + CASE type WHEN ''PK'' THEN '' PRIMARY KEY '' + CASE WHEN pk.ObjectID IS NULL THEN '' NONCLUSTERED '' ELSE '' CLUSTERED '' END WHEN ''UQ'' THEN '' UNIQUE '' END + CASE WHEN u.ObjectID IS NOT NULL THEN '' NONCLUSTERED '' ELSE '''' END
+ ''(''+REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id
order by key_ordinal FOR XML PATH(''''))), 2, 8000)) + '')''
FROM sys.key_constraints cco
inner join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
LEFT JOIN @U u ON cco.object_id = u.objectID
LEFT JOIN @t pk ON cco.object_id = pk.ObjectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50),@t TestTableType readonly,@u TestTableType readonly'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @t = @t
, @u = @u;
END;
INSERT INTO @Definition (FieldValue) VALUES (')');
END;
SET @sql = N'
use ' + @DBName
+ N'
select '' on '' + d.name + ''([''+c.name+''])''
from sys.tables t join sys.indexes i on(i.object_id = t.object_id and i.index_id < 2)
join sys.index_columns ic on(ic.partition_ordinal > 0 and ic.index_id = i.index_id and ic.object_id = t.object_id)
join sys.columns c on(c.object_id = ic.object_id and c.column_id = ic.column_id)
join sys.schemas s on t.schema_id=s.schema_id
join sys.data_spaces d on i.data_space_id=d.data_space_id
where t.name=@TableName and s.name=@schema
order by key_ordinal
';
PRINT 'x';
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
IF @IncludeClusteredIndex = 1
BEGIN
SET @sql = N'
use ' + @DBName
+ N'
SELECT distinct '' CREATE '' + CASE WHEN i.is_unique = 1 THEN ''UNIQUE '' ELSE '''' end + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '
+ @DBName + N'.' + @NewTableSchema + N'.' + @NewTableName
+ N' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema and i.type_desc = ''CLUSTERED''
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @ClusteredPK = @ClusteredPK;
END;
IF @IncludeIndexes = 1
BEGIN
SET @sql = N'
use ' + @DBName
+ N'
SELECT distinct '' CREATE '' + CASE WHEN i.is_unique = 1 THEN ''UNIQUE '' ELSE '''' end + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '
+ @DBName + N'.' + @NewTableSchema + N'.' + @NewTableName
+ N' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema and i.type_desc <> ''CLUSTERED''
' ;
PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @ClusteredPK = @ClusteredPK;
END;
--SELECT * FROM @Definition;
INSERT INTO @MainDefinition (FieldValue)
SELECT FieldValue FROM @Definition ORDER BY DefinitionID ASC;
--SELECT * FROM @MainDefinition;
----------------------------------
DECLARE @q Varchar(MAX);
SET @q = (SELECT Replace((SELECT FieldValue FROM @MainDefinition FOR XML PATH('')), '</FieldValue>', ''));
SET @script = (SELECT Replace(@q, '<FieldValue>', ''));
END TRY
-- ##############################################################################################################################################################################
BEGIN CATCH
BEGIN
-- INIZIO Procedura in errore =========================================================================================================================================================
PRINT '***********************************************************************************************************************************************************';
PRINT 'ErrorNumber : ' + Cast(Error_Number() AS NVarchar(MAX));
PRINT 'ErrorSeverity : ' + Cast(Error_Severity() AS NVarchar(MAX));
PRINT 'ErrorState : ' + Cast(Error_State() AS NVarchar(MAX));
PRINT 'ErrorLine : ' + Cast(Error_Line() AS NVarchar(MAX));
PRINT 'ErrorMessage : ' + Cast(Error_Message() AS NVarchar(MAX));
PRINT '***********************************************************************************************************************************************************';
-- FINE Procedura in errore =========================================================================================================================================================
END;
SET @script = '';
RETURN -1;
END CATCH;
-- ############################################################################################################################################################################## आप विदेशी कुंजी के साथ तालिका सूची की प्रतिलिपि बनाने के लिए इस सूची का उपयोग कर सकते हैं, लेकिन अनुक्रमित के बिना। यह स्क्रिप्ट उपयोगकर्ता परिभाषित प्रकारों और कंप्यूटेड कॉलमों को इनायत से संभालती है।
--\
---) Author: Hans Michiels
---) Script to copy a sql server table structure with foreign keys but without indexes.
---) This script handles user defined types and computed columns gracefully.
--/
/*
(c) Copyright 2016 - hansmichiels.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
--\
---) VARIABLES DECLARATIONS
--/
DECLARE @CrLf NVARCHAR(2)
DECLARE @Indent NVARCHAR(2)
DECLARE @nsql NVARCHAR(MAX)
DECLARE @SimulationMode CHAR(1)
DECLARE @SourceSchemaAndTable NVARCHAR(260)
DECLARE @TargetSchemaAndTable NVARCHAR(260)
DECLARE @FkNameSuffix NVARCHAR(128)
DECLARE @TableOptions NVARCHAR(500)
--\
---) CONFIGURATION: set the source and target schema/tablename here, and some other settings.
--/
SELECT
@SimulationMode = 'Y' -- Use Y if you only want the SQL statement in the output window without it being executed.
, @SourceSchemaAndTable = '[Production].[Product]'
, @TargetSchemaAndTable = '[stg].[Product]'
, @TableOptions = ' WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]'
, @FkNameSuffix = '_' + REPLACE(CAST(NEWID() AS VARCHAR(40)), '-', '') -- A Guid is added to the foreign key name to make it unique.
, @CrLf = CHAR(13) + CHAR(10)
, @Indent = SPACE(2)
-- For 'min' script use this (in case sql is near 4000 characters):
-- , @CrLf = ' '
-- , @Indent = ''
--\
---) BUILD SQL FOR CLONING TABLE
--/
SELECT @nsql
= ISNULL(@nsql, '')
+ CASE col_sequence WHEN 1 THEN
@CrLf + 'IF OBJECT_ID(N''' + @TargetSchemaAndTable + ''', ''U'') IS NOT NULL DROP TABLE ' + @TargetSchemaAndTable + ';'
+ @CrLf + 'CREATE TABLE ' + @TargetSchemaAndTable + @CrLf + @Indent + '( ' ELSE @CrLf + @Indent + ', ' END
+ [definition]
FROM (
SELECT ROW_NUMBER() OVER (PARTITION BY tb.object_id ORDER BY tb.object_id, col.column_id) AS col_sequence
, QUOTENAME(col.name) + ' '
+ COALESCE(
'AS ' + cmp.definition + CASE ISNULL(cmp.is_persisted, 0) WHEN 1 THEN ' PERSISTED ' ELSE '' END,
CASE
WHEN col.system_type_id != col.user_type_id THEN QUOTENAME(usr_tp.schema_name) + '.' + QUOTENAME(usr_tp.name)
ELSE
QUOTENAME(sys_tp.name) +
CASE
WHEN sys_tp.name IN ('char', 'varchar', 'binary', 'varbinary') THEN '(' + CONVERT(VARCHAR, CASE col.max_length WHEN -1 THEN 'max' ELSE CAST(col.max_length AS varchar(10)) END) + ')'
WHEN sys_tp.name IN ('nchar', 'nvarchar') THEN '(' + CONVERT(VARCHAR, CASE col.max_length WHEN -1 THEN 'max' ELSE CAST(col.max_length/2 AS varchar(10)) END) + ')'
WHEN sys_tp.name IN ('decimal', 'numeric') THEN '(' + CAST(col.precision AS VARCHAR) + ',' + CAST(col.scale AS VARCHAR) + ')'
WHEN sys_tp.name IN ('datetime2') THEN '(' + CAST(col.scale AS VARCHAR) + ')'
ELSE ''
END
END
)
+ CASE col.is_nullable
WHEN 0 THEN ' NOT'
ELSE ''
END + ' NULL' AS [definition]
FROM sys.tables tb
JOIN sys.schemas sch
ON sch.schema_id = tb.schema_id
JOIN sys.columns col
ON col.object_id = tb.object_id
JOIN sys.types sys_tp
ON col.system_type_id = sys_tp.system_type_id
AND col.system_type_id = sys_tp.user_type_id
LEFT JOIN
(
SELECT tp.*, sch.name AS [schema_name]
FROM sys.types tp
JOIN sys.schemas sch
ON tp.schema_id = sch.schema_id
) usr_tp
ON col.system_type_id = usr_tp.system_type_id
AND col.user_type_id = usr_tp.user_type_id
LEFT JOIN sys.computed_columns cmp
ON cmp.object_id = tb.object_id
AND cmp.column_id = col.column_id
WHERE tb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U')
) subqry
;
SELECT @nsql
= ISNULL(@nsql, '')
+ CASE col_sequence
WHEN 1 THEN @CrLf + ', PRIMARY KEY ' + CASE is_clustered_index WHEN 1 THEN 'CLUSTERED' ELSE 'NONCLUSTERED' END
+ @CrLf + @Indent + '( '
ELSE @CrLf + @Indent + ', '
END
+ QUOTENAME(pk_cols.column_name)
+ CASE is_descending_key
WHEN 1 THEN ' DESC'
ELSE ' ASC'
END
FROM (
SELECT TOP 2147483647 sch.name as schema_name, tb.name as table_name, col.name as column_name
, ROW_NUMBER() OVER (PARTITION BY tb.object_id ORDER BY tb.object_id, col.column_id) AS col_sequence
, ic.is_descending_key
, CASE WHEN idx.index_id = 1 THEN 1 ELSE 0 END AS [is_clustered_index]
FROM sys.tables tb
JOIN sys.schemas sch
ON sch.schema_id = tb.schema_id
JOIN sys.indexes idx
ON idx.is_primary_key = 1
AND idx.object_id = tb.object_id
JOIN sys.index_columns ic
ON is_included_column = 0
AND ic.object_id = tb.object_id
AND ic.index_id = idx.index_id
JOIN sys.columns col
ON col.column_id = ic.column_id
AND col.object_id = tb.object_id
WHERE tb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U')
ORDER BY col.column_id
) pk_cols
SELECT @nsql = @nsql + @CrLf + @indent + ') ' + @TableOptions
IF @SimulationMode = 'Y'
BEGIN
PRINT '-- Simulation mode: script is not executed.'
END
PRINT @nsql;
IF @SimulationMode != 'Y'
BEGIN
EXEC(@nsql);
END
--\
---) Copy foreign key constraints
---) A guid is added to the foreign key name to make it unique within the database.
--/
SET @nsql = N'';
SELECT @nsql += N'
ALTER TABLE '
+ @TargetSchemaAndTable
+ ' ADD CONSTRAINT [' + LEFT(fk.name + @FkNameSuffix, 128) + '] '
+ ' FOREIGN KEY (' + STUFF((SELECT ',' + QUOTENAME(col.name)
-- get all the columns in the constraint table
FROM sys.columns AS col
JOIN sys.foreign_key_columns AS fkc
ON fkc.parent_column_id = col.column_id
AND fkc.parent_object_id = col.[object_id]
WHERE fkc.constraint_object_id = fk.[object_id]
ORDER BY fkc.constraint_column_id
FOR XML PATH(N''), TYPE).value(N'.[1]', N'nvarchar(max)'), 1, 1, N'')
+ ') REFERENCES ' + QUOTENAME(rs.name) + '.' + QUOTENAME(rtb.name)
+ '('
+ STUFF((SELECT ',' + QUOTENAME(col.name)
-- get all the referenced columns
FROM sys.columns AS col
JOIN sys.foreign_key_columns AS fkc
ON fkc.referenced_column_id = col.column_id
AND fkc.referenced_object_id = col.[object_id]
WHERE fkc.constraint_object_id = fk.object_id
ORDER BY fkc.constraint_column_id
FOR XML PATH(N''), TYPE).value(N'.[1]', N'nvarchar(max)'), 1, 1, N'') + ');'
FROM sys.foreign_keys AS fk
JOIN sys.tables AS rtb -- referenced table
ON fk.referenced_object_id = rtb.[object_id]
JOIN sys.schemas AS rs
ON rtb.[schema_id] = rs.[schema_id]
JOIN sys.tables AS ctb -- constraint table
ON fk.parent_object_id = ctb.[object_id]
WHERE rtb.is_ms_shipped = 0 AND ctb.is_ms_shipped = 0
AND ctb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U');
IF @SimulationMode = 'Y'
BEGIN
PRINT '-- Simulation mode: script is not executed.'
END
PRINT @nsql;
IF @SimulationMode != 'Y'
BEGIN
EXEC(@nsql);
ENDअगर आप रुचि रखते हैं तो आप इसे मेरे ब्लॉग पर भी देख सकते हैं: http://www.hansmichiels.com/2016/02/18/how-to-copy-a-database-table-structure-t-sql-scripting-series -s01e01 /